Setting up the integrated amplifier
To connect to Meridian 600 or 200 Series equipment
If your system includes any Meridian 600 or 200 Series units, with 600 COMMS or 200 COMMS sockets, you should set all the 500 Series units to 200 COMMS operation using the following procedure:
●Turn off the integrated amplifier, using the power switch on the back panel.
●Turn on the power again while holding down the Off key on the front panel.
The display will show | Ty 1 | |
the current Type setting: | ||
|
●Press A or V on the front panel to change the Type setting.
If your system includes a Meridian CD player select Type 2; otherwise select Type 6.
For example, if you select | Ty 2 | |
Type 2 the display will show: | ||
|
●Switch the power off and on again to restore the integrated amplifier to normal operation.
●To return to 500 COMMS operation repeat the above procedure, and select Type 1, 3, 4, or 5. For more information see Choosing standard settings, page 16.
30
