56 Meridian Digital Telephone IP Adapter Installation and Administration Guide
Configuring the IP Adapter unit using the telephone menu Standard 1.1
Backing up while in the telephone menu
If, at any time while working with the telephone set menu, you make a mistake,
you can return to the previous level in the menu system by pressing the Release
(Rls, R, or Goodbye depending on your telephone set) key once.
Exiting the system using the Release key
To exit the system at any time using the release key, complete the following
procedure:
1Press the Release key to move up in the menu one level at a time until you
reach the top level.
Note: The Confirm Exit? message indicates that you have reached the top
level of the menu.
2The telephone display asks you to confirm your request to exit the
configuration menu, similar to the following:

Confirm Exit?

[1-Yes 2-No]
Note: If you exit the system without saving any changes you have made, your
changes will stay in active memory until the next system restart/reboot. After
this, your changes are lost.
IF you wish to THEN do the following:
continue working, a. Press 2.
b. Press the Hold key.
Result: The telephone display continues, as though
you had entered a “No” response to the most recent
option you had on the menu.
stop working with
the telephone
menu,
a. Press 1.
b. Press the Hold key.
Result: The following screen confirms that you have
left Remote Office configuration.

You are logged out.