Meridian Digital Telephone IP Adapter Installation and Administration Guide 73
October 2001 Configuring the IP Adapter unit using the telephone menu
14 The telephone display asks if you want to modify the local calling setti ngs
on this Meridian Digital Telephone IP Adapter unit, similar to the following:
Modify Local Calling?
[1-Yes 2-No]
This step does not apply to Meridian Digital Telephone IP Adapter units.
Press 2 and continue to step 15 on page 74.
enable IP
connection to the
RLC from this
Meridian Digital
Telephone IP
Adapter unit,
a. Press 1.
b.Press the Hold key.
Result: The telephone display prompts you to enter
an IP address for the RLC and shows the current
value it has for this address, similar to the following:
Enter RLC IP Address192.68.243.254
c. Press the digits of the new RLC IP address.
d.Press the Hold key.
Result: The telephone display prompts you for the
IP Signaling setting for this Meridian Digital
Telephone IP Adapter unit and displays the current
setting, similar to the following:
IP Signaling1-Permanent 2-OnDemand:2
e. Choose from the options presented.
f. Press the Hold key.
g.Proceed to step 14 , below.
disable IP
connection to the
RLC from this
Meridian Digital
Telephone IP
Adapter unit,
a. Press 2.
b.Press the Hold key.
Result: Proceed to step 19 on page 77.
IF you want to THEN do the following: