Meridian Digital Telephone IP Adapter Installation and Administration Guide 63
October 2001 Configuring the IP Adapter unit using the telephone menu
8The telephone display asks if you want to modify the SPRE code that you
must dial to go online manually, similar to the following:
Modify Online SPRE?
[1-Yes 2-No]
IF you want to THEN do the following:
modify the
number that you
must dial to go
online with the
Meridian Digital
Telephone IP
Adapter unit in the
absence of an
online command
in the Online/
Offline Table,
a. Press 1.
b.Press the Hold key.
Result: The telephone display prompts you for a
new online SPRE code. The telephone display also
shows the current online SPRE code, similar to the
following:
Enter Online SPRE#99
c. Press the digits of the new online SPRE code.
Note: All SPRE codes begin with a pound sign (#).
It is not necessary to press the # key when modifying
a SPRE code. However, when you actually use a
SPRE code, you must press the # key for the host
PBX to recognize the digits as a SPRE code.
d.Press the Hold key.
e. Proceed to step 9 on page 64.
retain the current
online SPRE code, a. Press 2.
b.Press the Hold key.