Connecting DSP5000

48

 

 

If you are mixing Meridian 200- or 600-Series with 500-Series components

1.Connect the digital and analogue audio as described in the previous sections.

2.Locate the DIN plug at the source end of the M5-Lead. Connect it to one of the sockets COMMS on the rear of a 500-Series unit.

3.Connect the 500-Series communications together as described earlier and in the 500 User Guide(s).

4.Make a communications connection between one of the 500-Series and one of the 200-Series units with a CD5 lead – obtainable from your dealer. (The P-lead supplied with the 200-Series will work, but the CD5 is preferred)

5.Configure the DSP5000 and 500-Series item for 200 mode (see page 32)

If you are using no other Meridian equipment

1Connect the DSP5000'sD1 and D2 digital inputs to appropriate digital sources

2Configure the DSP5000 for Type 5 (see page 32)

DO NOT, under any circumstances, connect anything other than another

Meridian product to the sockets marked Comms Input and Comms

Output on the rear of the DSP5000.

RS232 connection

The DSP5000 installation can be controlled directly from a computer over a standard RS232 interface.

Separate documentation and application programs are available from your

Meridian dealer.

Meridian Digital Theatre

For details on connecting a Meridian Digital Theatre, or for connecting the DSP5000 with a Meridian 565 Digital Surround Processor, see the handbook supplied with 565.

DSP5000 User Guide