Help 53
Note DSP5000 is a digital audio and computing device which has been designed to very high standards of electromagnetic compatibility.
FCC WARNING: This equipment generates and can radiate radio frequency energy, and if not installed and used correctly in accordance with our instructions may interfere with radio communications or radio and television reception. It has been
If this equipment does interfere with or suffer interference from radio or television reception, then the following measures should be tried:
1.Reorient the receiving aerial (or antenna), or route the antenna cable of the receiver as far away as possible from the DSP5000 and its cabling
2.Ensure that the receiver uses
3.Relocate the receiver with respect to the DSP5000
4.Connect the receiver and this product to different AC outlets
5.If the problem persists, contact your dealer
EEC This product has been designed to comply with the limits set out in
EN55013 and EN55020C.
REMEMBER to switch all units off before changing any connections.
Cleaning
The cabinet of the DSP5000 is finished with veneer.
The display panel is glass, and should be cleaned using a barely damp chamois leather.
Do not use abrasive cleaners on any part of the DSP5000.
The phono connectors on the rear of the DSP5000 are
Maintenance & service
The Meridian DSP5000 has been carefully designed to give years of untroubled service. There are no
In the unlikely event that your DSP5000 fails to function correctly, it should be returned, in its original packing, to your Meridian dealer. In case of difficulty, please write to the following address if you live in the UK:
Digital Gramophone & Wireless Ltd 14 Clifton Road
Huntingdon Cambridgeshire PE18 7EJ
Outside the UK, contact the importing agent for the territory. A list of Meridian agents abroad is available from the above address.
No responsibility can be accepted for the DSP5000 while it is in transit to the factory or an agent, and customers are therefore advised to insure the unit.
DSP5000 User Guide