Meridian Audio DVP1500 manual Adjusting the Dynamic Range of the Audio Soundtrack - DVD

Models: DVP1500

1 52
Download 52 pages 21.96 Kb
Page 26
Image 26
Adjusting the Dynamic Range
– DVD

DVD

Adjusting the Dynamic Range

of the Audio Soundtrack – DVD

Audio DRC stands for Audio Dynamic Range Compression. When Audio DRC is on, soft sounds such as dialog can be heard more clearly without making loud sounds even louder. When Audio DRC is set to [Off], there is no effect on the audio source.

Make changes to the [Audio DRC] setting in the Setup screen Audio 1 menu.

Audio1

A2 Video1 V2

Language General

 

 

Audio DRC

— Off

 

 

 

Dolby Digital Out

On

 

 

 

DTS Out

— Off

 

 

 

96kHz PCM Out

— 96kHz

48kHz

 

 

MPEG Out — MPEG

PCM

 

Dynamic playback at low volume

 

 

Move

 

SETUP

Exit

Settings: Off*

On

*Factory setting

Notes

Audio DRC is only effective with Dolby Digital audio sources.

If you have set the player to convert Dolby Digital audio to PCM, also make sure that you set the [Digital Out] to [On] to hear the Audio DRC effect.

The effect of Audio DRC depends on your speakers and AV amplifier settings.

NOTICE:

THE DIGITAL AUDIO SETTINGS

HAVE BEEN OPTIMIZED BY

FAROUDJA FOR THE NRS-DCS.

DO NOT CHANGE

THESE SETTINGS.

Setting the Digital Audio Output To Be Compatible with Your AV Component

This player is capable of digital audio output for Dolby Digital, DTS, MPEG, and signals with a sampling rate of 96 kHz. Make settings in the Setup screen Audio 1 menu to reflect the capabilities of the components that you have made digital connections to.

Notes

If you have already completed the Setup Navigator screen operations, the settings on this page have already been set by the player.

If you have made only stereo line connections (analog) using the supplied audio cord, it is not necessary to make any changes in this menu.

Dolby Digital Out

This player is capable of outputting the Dolby Digital surround sound audio signal. When the player is connected to an AV component that has a built-in Dolby Digital decoder, select [Dolby Digital]. This player can also convert the Dolby Digital signal to a digital Linear PCM signal, the same digital signal output from a CD. Select [Dolby Digital PCM] when you have made connections to an amplifier or receiver with a Dolby Pro Logic decoder or a Digital Analog Converter (DAC).

Audio1

A2

Video1

V2

Language

 

General

 

 

 

Audio DRC

— Off

 

 

 

 

Dolby Digital Out

Dolby Digital

 

 

DTS Out

Dolby Digital PCM

 

96kHz PCM Out

— 96kHz

48kHz

 

 

MPEG Out — MPEG

PCM

Change Dolby Digital output mode

 

 

 

 

 

 

 

 

 

Move

 

 

SETUP Exit

Settings: Dolby Digital*

Dolby Digital PCM

*Factory setting

22

Page 26
Image 26
Meridian Audio DVP1500 manual Adjusting the Dynamic Range of the Audio Soundtrack - DVD, Dolby Digital Out