Meridian Audio DVP1500 Resuming playback from where you stopped, Using the Setup Screen Menus

Models: DVP1500

1 52
Download 52 pages 21.96 Kb
Page 24
Image 24
Resuming playback from where you stopped

DVD

Resuming playback from where you stopped

– DVD/Super VCD/Video CD

Use the resume feature to restart playback from the point that the disc was stopped last time.

This features cannot be used with MP3s and CDs.

Press STOP once.

The display shows “RESUME” and the stop position is memorized.

The resume position remains memorized as long as the disc is in the player — even if you switch the power off.

Pressing STOP twice causes the disc to return to

the beginning when PLAY is pressed again. The display shows the disc type (DVDs or Super VCDs/ Video CDs).

Press PLAY .

Playback starts from the resume position.

Notes

The actual restart position may be slightly before or after the resume position.

If you want to remove the disc, but still want to resume playback from the last stopped position, use the LAST MEMORY feature instead (page 48).

Stopping Playback and Switching Power Off

– DVD/Super VCD/Video CD/CD/MP35

1

Press STOP ( on the front panel).

 

Playback stops.

2

Press OPEN/CLOSE ( on the front panel).

 

The disc tray comes out.

3

Remove the disc.

4

Press the Power button on the small

 

remote or the front panel

The disc tray goes back in.

Adjusting Audio

and Video

Settings

Using the Setup Screen

Menus

The procedure on this page describes how to operate the menus on the Setup screen. These menus are used to set and adjust a number of system settings. The various functions that can be adjusted are covered throughout this manual. The procedure on this page provides a basic outline for using the Setup screen menus.

When setting up for the first time

It is recommended to set up player using the Setup Navigator (page 17 ). If you selected [Auto Start Off] when the Setup Navigator appeared, you may still set up the player using the Setup Navigator in the General menu screen.

If you choose not to use the Setup Navigator, be sure to make the necessary settings in the Setup screen Audio 1, Audio 2, Video 1, Video 2 and Language menus as described on the following pages.

Some DVDs start playing automatically when loaded in the player. If a DVD has been loaded, be sure to press STOP before proceeding.

1 NOT ACTIVE

2 Press SETUP.

The Setup screen appears.

Example

 

 

Audio1 A2 Video1 V2 Language

General

 

Audio DRC — Off

 

 

Dolby Digital Out — Dolby Digital

 

DTS Out — Off

 

 

96kHz PCM Out — 96kHz ￿48kHz

 

MPEG Out — MPEG ￿PCM

 

Setup audio

 

 

Digital output format/tone adjust

 

Move

SETUP

Exit

20

Page 24
Image 24
Meridian Audio DVP1500 Resuming playback from where you stopped, Stopping Playback and Switching Power Off, Press PLAY