Metrologic Instruments MS9500 manual Scanner and Accessories, ∙ Installation and User’s Guide Mlpn

Scanner and Accessories

The following list of parts may or may not be included in the MS9500 kit.

∙Voyager MS9520 Single-Line Laser Scanner, or

Voyager MS9540 – CodeGate™ Single-Line Laser Scanner

∙AC to DC Power Transformer – Regulated 5.2VDC @ 650 mA output . One of the following may be included:

120 V United States: MLPN 45-45593

220 V – 240 V Continental European: MLPN 45-45591

220 V – 240 V United Kingdom: MLPN 45-45592

∙PowerLink Cable with built in power jack. One of the following may be included:

Standard: MLPN 53xxx* - 2.7 m (9’) coiled cord, long strain relief

or

Optional: MLPN 54xxx* - 2.1 m (7’) straight cord, short strain relief

*xxx specifies connection to host

∙Stand with mounting accessories

Clip-in Stand: MLPN 46-46055, or

Mask Stand: MLPN 46-46128

∙Installation and User’s Guide – MLPN 2410

Available on Metrologic website – www.metrologic.com

∙MetroSelect Scanner Configuration Guide – MLPN 2407 Available on Metrologic website – www.metrologic.com

Other items may be ordered for the specific protocol being used. To order additional items, contact the dealer, distributor or call Metrologic’s Customer Service Department at 1-800-ID-METRO or 1-800-436-3876.

Caution:

To maintain compliance with applicable standards, all circuits connected to the scanner must meet the requirements for SELV (Safety Extra Low Voltage) according to EN 60950.

To maintain compliance with standard CSA C22.2 No. 950/UL 1950 and norm EN 60950, the power source should meet applicable performance requirements for a limited power source.

2