Metz 20 TK 51 operating instructions Mode item there are five predefined

sound system is Mono and the sound effect is set ON, then the sound will be heard as if it is Stereo. If the current sound system is Stereo, switching this effect on will make the sound deeper. Switching it off will make no change in Mono and 2QStereo.

To Change Headphone Sound Settings

•Using “” or “” button select Headphone.

•Press “” or “” button or directly press “MODE” button on Headphone, to enter the Headphone menu. This is a sub-menu of Sound menu, and all options in this menu are working as the same in the Sound menu.

Setting Headphone Volume

•As you enter the Headphone sound menu, Volume will be the first selected option.

•Press “” button to increase volume.

•Press “” button to decrease volume.

Setting Headphone Sound Mode

• Using “” or “” button select Mode.

Pressing “” or “” button will change the current sound mode. (e.g.: If the current sound mode is stereo, it will be stereo or visa versa).

In case of bilingual broadcast, you can se- lect original or dubbed language again us- ing mode menu. So when somebody listens to the original language from the loudspeak- ers, somebody else can listen to the dubbed language from headphone.

To Store the Settings

•Press “MODE” button on the remote control to store the settings directly.

or,

•Using “” or “” button select Store. Press

“”, “” or “MODE” button to store current headphone volume and sound mode. The stored values will be valid for all the programmes.

Equalizer

•Using “” or “” button select Equalizer.

•Press “” or “” button or directly press “MODE” button to enter Equalizer sub-menu.

In Mode item there are five predefined and

- 44 -