By either ways the TV will switch on and the led becomes green.

To switch the TV off

Press the “” button on the remote control or at the top of the TV, so the TV will switch to stand-by mode and the led will turn to red from green

or,

Unplug the power connection of the TV.

Operating the TV

You can operate your TV both using the remote control handset and onset buttons.

A.P.S. (Automatic Programming System)

"All Prestored Programmes Will Be Erased" message will be displayed when you turn on your TV for the first time. APS, searches and sorts all channels and stores them automatically on your TV, according to the transmission of programme systems in your area.

To cancel APS before starting, press “TV” button. First of all choose the “Country”. This, will effect the sort process in APS. By

pressing the “ ” or “ ” button, come to the "Language" item and select the language in which the menus of the TV will appear. As soon as you change the language, the menu items will be displayed in the selected language . To select “Continue” use

” or “ ” button and press “ ” or “ ” but- ton.

After APS is finalized, a programme list will apper on the screen. In the programme list you will see the programme numbers and names assigned to the programmes.

If you press the “TV” button at any time while the A.P.S. is running, the A.P.S. will be ended. Then, the program list on the screen will show channels captured until this time.

If you do not accept the locations and / or the programme names of programmes, you can change them in Programme menu.

Operating with the buttons on the TV set

Volume setting and programme selection can be made by using the buttons at the control panel on the top of the TV.

Volume Setting

Press “- VOLUME” button to decrease vol- ume or “VOLUME +” button to increase vol- ume, so a volume level scale (slider) will be displayed at the middle of the bottom on the screen.

Programme Selecting

Press “P/Ch +” button to select the next pro- gramme or “- P/Ch” button to select the pre- vious programme.

Entering Main Menu

• Press "M" button to enter Main menu. In the M a i n m e n u s e l e c t s u b m e n u u s i n g “- P/Ch” or “P/Ch +” button and enter the sub- menu using “- VOLUME” or “VOLUME +” but- ton. To learn the usage of the menus, refer to the Menu System section.

Operating with Remote Control

The remote control handset of your TV is de- signed to control all the functions of the model you selected. The functions will be described in accordance with the menu sys- tem of your TV.

Functions of the menu system are de- scribed in Menu System section.

- 41 -

Page 43
Image 43
Metz 20 TK 51 Operating the TV, To switch the TV off, S. Automatic Programming System, Operating with Remote Control