MGE UPS Systems 66102, 66103 user manual Mail Message Settings

4.3.2 E-mail Message Settings

This page enables customisation of the content of the messages received by recipients of e-mails sent by the card. Customisation is common to the four recipients that can be notified (see E-mail notification).

◗Sender

(59 characters maximum) identifies the source of the message. The default value is ups@domain.com.

This field is free. However, depending on the type of SMTP server configuration, it is possible that the server checks that the domain name contained in the Sender address exists, and even that the user in the Sender address belongs to this domain.

◗Subject

enables the user to specify the subject of the e-mail to be sent. By entering some free text and selecting from several optional fields, if desired, the message subject is built:

-UPS name recalls the name of the UPS; it may or may not be selected.

-UPS location recalls the geographic location of the UPS (see System Settings); it may or may not be selected.

-Event message identifies the event generating the e-mail; it may or may not be selected.

◗Message text is a free zone.

ENERGIZE YOUR ENTERPRISE
Network Management Card – User Manual	34003991EN/DA	Page 45/120