6.1Choice 1: Restart / Reset
Use this function to restart the card; two choices are possible
1 : Hardware Reset: Equivalent to a restart of the electrical power supply.
2 : Restart application: Restarts only the application part.
Reset
1 : Hardware Reset
2 : Restart application
0 : Exit
6.2Choice 2: Network Configuration
Use this function to access network settings.
Network settings
1 : Read Network settings
2 : Modify Network settings
3 : Set Ethernet speed
0 : Exit
6.2.1 Choice 1: Read Network settings
Enables reading of the card's routine settings
Network configuration :
MAC address : 00:06:23:00:1F:8F
Mode : Static IP
IP address : 172.17.18.129
Subnet mask : 255.255.248.0
Gateway : 172.17.17.1
ENERGIZE YOUR ENTERPRISE |
|
|
Network Management Card – User Manual | 34003991EN/DA | Page 73/120 |
