3. Operations
Displaying the status of the Environmental Monitor
The Envmon command displays the status of the integrated Environmental Monitor.
By default, only administrative user accounts are allowed access to the Envmon command. An administrator may user the Set User Envmon command to enable and disable access for other user accounts.
To display the status of the Environmental Monitor:
At the AmpMeter PDU: prompt, type envmon and press Enter.
Example
The following command displays the status of the Environmental Monitor.
AmpMeter PDU: envmon<Enter> |
|
| |
Environmental Monitor .A | Status: Normal |
| |
Name: Florida_HQ_1 |
| ||
Temperature/Humidity Sensors |
|
| |
ID | Name | Temperature | Humidity |
.A1 | Temp_Humid_Sensor_A1 | Not Found | Not Found |
.A2 | T/H2_Florida_HQ_1 | 23.5 Deg. C | 22 % RH |
Starting a new session
The Login command activates the Username: prompt. The current session ends, allowing a user to log in and start a new session under a different username.
To start a new session:
At the AmpMeter PDU: prompt, type login and press Enter. The Username: prompt appears.
Ending a session
The Quit or Logout commands ends a session. A session ends automatically when no activity is detected for five minutes, or upon loss of connection.
To end a session:
At the AmpMeter PDU: prompt, type quit and press Enter, or
Type logout and press Enter.