3. Operations

Administration Commands

Administration commands may only be issued by a user with administrative privileges, such as the predefined MGEUPS user or another user who has been granted administrative privileges with the Set User MGEUPSpriv command.

User Administration

Creating a user account

The Create User command creates a user account with the specified username and password. See Usernames and Passwords in this chapter for more information.

To create a user account:

At the AmpMeter PDU: prompt, type create user, optionally followed by a 1-16 character username (Spaces are not allowed, and usernames are not case sensitive). Press Enter.

At the Password: prompt, type a password of up to 16 alphanumeric and other typeable characters (ASCII 32 to 126 decimal). Passwords are case sensitive. Press Enter. To specify no password, press Enter at the prompt.

At the Verify Password: prompt, retype the password. Press Enter. To verify no password, press Enter at the prompt.

Example

The following command creates the user account JaneDoe:

AmpMeter PDU: create user JaneDoe<Enter>

Password: <Enter>

Verify New Password: <Enter>

For security, password characters are not displayed.

Removing a user account

The Remove User command removes a user account.

NOTE: You may remove the predefined user account MGEUPS only if another user account has been granted administrative privileges using the Set User MGEUPSpriv command.

To remove a user account:

At the AmpMeter PDU: prompt, type remove user, optionally followed by a username. Press Enter.

Page 22 - 301-0399-3 Rev B.