![](/images/new-backgrounds/1264122/26412251x1.webp)
EPS 7000 Single Module
2.2Settings Selection Screen
The settings selection screens allow the user to configure the display language and set the contrast of the LCD display.
To access the settings selection screen, press the settings pushbutton, and follow the steps. See Figure
ø
LANGUAGE = ENGLISH U.S. ≥=SELECT *=CONFIRM.
°
DISPLAY CONTRAST ≥=SELECT *=CONFIRM.
°
Press the settings pushbutton to access the language selection menu.
Select the display language: French, English (U.K.), Spanish, Dutch, Italian, Swedish, Portugese, English (U.S.), German, or Finnish
Press the °pushbutton to confirm the language selection and access the contrast selection menu.
Set the display contrast by pressing the ≥ pushbutton until the desired contrast is reached.
Press the °pushbutton to confirm the contrast selection and return to the general status screen.
general status screen
IMPORTANT: | Select ENGLISH U.S. as the display language to match the |
| displays as presented in this manual. |
|
|
2.3Alarms
In the event of an alarm condition, the general status screen shows an alarm message. To determine the specific condition causing the alarm, press the alarm key on the front panel and follow the sequential steps.
If there is a flashing exclamation mark (!) in the displayed message, there is additional information to be viewed, follow the steps as indicated in Figure
Most alarm messages are
page 2 | Operation |