MicroNet Technology MN100 manual Audible Signals and Alarms

Operation

2.4Audible Signals and Alarms

At stages during its operation your Micronet instrument will beep to indicate alarms or moments of importance.

Power-up Once operating as part of a network the instrument will issue a single beep as it is switched on by

pressing the button for 2 second.

Button Press A single beep is issued each time a button is pressed A second beep is issued after a 2 seconds hold down

of the button.

Alarm	Continuous bursts of three beeps will indicate an
	alarm. The alarm activated will be indicated on the
	digital display, accompanied by the flashing
	symbol. Pressing any button will silence the alarm.
Timer	A single beep will be issued at each minute of the
	countdown. With 1 minute left to go a beep will sound
	every 10 seconds. With 10 seconds to go a beep will
	sound every second.
	Countdown complete will be indicated by a single
	burst of three beeps.

7