MicroNet Technology RAIDBank4 manual RAID Control-LCD, RAID Controls- LCD Interface, Conventions

3-RAID Control-LCD

Chapter 3. RAID Controls- LCD Interface

This Chapter describes the menu and control structure for your RAIDBank4 using the front panel, serial port, or via Telnet. The RAIDBank4 configuration utility is firmware-based and its operation is independent of host computer type or operating system.

Conventions

In this chapter, menu navigation is described as follows:

UP/DOWN scrolling through options ENT making selections

ESC Cancelling current menu choice

MicroNet Tech

Login Procedure

By Default, The RAIDBank4 ships without a password defined (user changeable to protect the internal RAIDBank4 from unauthorized entry). The controller will check the password only when entering the main menu from the initial screen The RAIDBank4 will automatically go back to the initial screen when it does not receive any command in twenty seconds.

The Main Menu Configuration Tree

1. Quick Volume/RAID Setup
2. RAID Set Function	2.1	Create RAID Set
	2.2	Delete RAID Set
	2.3	Expand RAID Set
	2.4	Offline RAID Set
	2.5	Activate RAID Set
	2.6	Create Hot Spare
	2.7	Delete Hot Spare
	2.8	RAID Set Information
3. Volume Set Function	3.1	Create Volume Set
	3.2	Delete Volume Set
	3.3	Modify Volume Set
	3.4	Check Volume Set Consistency
	3.5	Stop Volume Set Consistency
	3.6	Display Volume Info
4. Physical Drives	4.1	Display Drive Information
	4.2	Create Pass-Through Disk
	4.3	Modify Pass-Through Disk
	4.4	Delete Pass-Through Disk
	4.5	Identify Selected Drive
5. RAID System Controls	5.1	Mute The Alert Beeper
	5.2	Alert Beep Setting
	5.3	Change Password
	5.4	JBOD/RAID Operation
	5.5	RAID Rebuild Priority
RAIDBank4 Owner’s Manual		18