4-RAID Control-Web Interface
5.1.13 Auto Activate Incomplete RAID (enabled/disabled)
This option determines the default behavior of the RAIDBank4 when booting up with a degraded Volume set. When enabled, the RAIDBank4 will attempt to activate a degraded volume on boot.
5.1.14 Disk Capacity Truncation Mode
Disk Truncation is used to decrease disk usable space for compatibility purposes. Please do not change this setting unless instructed by Micronet’s Technical Support.
5.2 Ethernet Configuration
This menu contains The Ethernet specific functions of the RAIDBank4. The following subsections discuss each attribute’s descriptions. When all desired options are entered, check the box labelled “Confirm
the operation” and Click the 
Button
to finalize or 
to revert all options to default.
5.2.1DHCP Function (enable/disable) DHCP (Dynamic Host Configuration Protocol) is a protocol that lets network administrators manage centrally and automate the assignment of IP (Internet Protocol) configurations on a computer network. Select this option if you wish to use the DHCP address services in your network. DHCP may be “Disabled’ or ‘Enabled.”
5.2.2Manual (Static) IP Address
Select this option to manually configure the IP address of the controller. Make sure that the assigned IP address is in the same range of your default router address and that it is unique to your private network.
5.2.3 Gateway IP address
If a static IP address is assigned, Enter the router address of your network in this field.
5.2.4 Subnet Mask
If a static IP address is assigned, enter your network subnet mask in this field. If you don’t know your network’s subnet mask, consult your network administrator.
5.2.5 HTTP Port Number (80)
The HTTP port number is the TCP Port used for the web user interface. The default port is 80, and can be changed per user specification. To access the web UI with a port other then 80, point your browser to http://<IPADDRESS>:<HTTP PORT>
RAIDBank4 Owner’s Manual
Note:
The RAIDBank4 cannot use ports 7168-8191 for IP services.
40
