|
| |
|
|
|
Host eSATA channel | SATA150, SATA150+NCQ, SATA300, SATA300+NCQ (default.) |
|
Transfer Mode |
|
|
|
|
|
HOST Channel (SATA/USB) | RAIDBank4 supports two host channels. Host Channel 0 is the host |
|
| eSATA interface, and Channel 1 is the USB 2.0 host interface. |
|
|
|
|
Drive Number (LUN | RAIDBank4 supports 4 logical units. Any Volume Set may be mapped |
|
| to eSATA and/or USB host channels independently. |
|
|
|
|
!SIMULTANEOUS HOST CHANNEL VOLUME MAPPING
The RAIDBank4 can map a Volumeset to both host channels simultaneously for clustering environment. Never attempt to mount the same volume on both channels without proper clustering software.
Mounting the same volume on both channels without proper software can result in
data corruption or loss!
When all options are set, check the “Confirm The Operation” checkbox and click 
to
commit or 
to revert all options to default. A Confirmation screen appears prior to the operation conclusion.
3.2 Delete Volume Set
To delete a Volume Set, choose the “Delete Volume Set” option. A table will appear with the available Volume Sets. Check the radio button next to the Volume Set to be deleted, and check
the box labelled “Confirm the operation.” Click the 
Button.
3.3 Modify Volume Set
To modify a Volume Set, choose the “modify Volume Set” option. A table will appear with the available Volume Sets. Check the radio button next to the Volume Set to be modifed, and click
the 
Button. A table will appear with the modifiable attributes (refer to section 3.1 in this chapter for attribute descriptions.) You can modify all values except the capacity.
Note:
When a volume set is migrating from one RAID level to another, a volume set stripe size changes, or when a disk is added to a RAID set the volume state will change to migrating. During migration. The migration status will be displayed in the volume state area of the LCD display. No additional volume changes can be performed until migration completes.
3.4 Check Volume Set Consistency
To check the internal integrity of a Volume Set, choose the “Check Volume Set” option. A table will appear with the available Volume Sets. Check the radio button next to the Volume Set to
be checked, and check the box labelled “Confirm the operation.” Click the 
Button.
3.5 Stop Volume Set Consistency Check
To stop a consistency check already in progress, choose the “Stop Volume Set Check” option. A table will appear with the available Volume Sets. check the radio button next to the Volume Set
to be aborted, and check the box labelled “Confirm the operation.” Click the 
Button.
RAIDBank4 Owner’s Manual | 36 |
