Microsoft PRO 1106EX, PRO 1356EX, PRO 906EX manual

Operating Instructions

General Settings Guide1Connecting the Machine2System Settings3Tray Paper Settings4Copier/Document Server Features5Printer Features6Scanner Features7Registering Addresses and Users for Scanner Functions8Other User Tools9Appendix

Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety Information in "About This Machine" before using the machine.

Contents

General Settings Guide 1Connecting the Machine 2System Settings 3Tray Paper Settings 4Copier/Document Server Features Page ❖About This Machine ❖General Settings Guide ❖Troubleshooting ❖Security Reference ❖Copy / Document Server Reference ❖Other manuals Note 1. Connecting the Machine 2. System Settings 3. Tray Paper Settings 4. Copier/Document Server Features 5. Printer Features 6. Scanner Features 7. Registering Addresses and Users for Scanner Functions 8. Other User Tools 9. Appendix Page Important User Tools [System Settings] 3.Press this to close the User Tools menu Energy Saver Clear Modes Reference A Press the {User Tools} key B Select the menu [OK] [Exit] A Press the {Counter} key Page 1. Connecting the Machine 1Important A Make sure the main power switch on the machine is "Off B Connect the Ethernet interface cable to the 10BASE-T/100BASE-TXport D Turn the main power switch of the machine on Printer Reference Connect the USB 2.0 interface cable to the USB2.0 port Connect the other end to the USB port on the host computer 1A Connect the IEEE 1394 interface cable to the IEEE 1394 port About this machine Turn off the main power switch of the host computer Connect the IEEE 1284 interface cable to the IEEE 1284 port Turn the main power switch of the machine "On Turn on the host computer [Cancel] 1Note Setup Procedure Select [802.11 Ad-hoc] ❒ For details about how to make settings of wireless LAN from the control pan el on the machine, see "IEEE 802.11b ❖When using in ad-hocmode / 802.11 ad-hocmode 1.If the IEEE 802.11b interface unit is working, it is lit in orange If it is connected properly to the network, the LED is green when in Checking the Signal APress [System Settings] This section lists the settings required for using the printer function Heading Setting Item Setting Requirements 1 ❒ IPv6 can be used only for the printer function [Effective Protocol] [Active] p.52 “Interface Settings” p.62 “File Transfer” IEEE 802.11b (wireless LAN) ❒ As to [Effective Protocol], check if the protocol to use is set as [Active] ❒ [IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter face board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence This section describes necessary set items for sending e-mail When setting [POP before SMTP] [On] [Reception Proto- col] [POP3/IMAP4 Settings] ❒[IEEE 1394] is displayed when optional IEEE 1394 interface board is installed Page This section describes necessary set items for sending file Page Page This section describes necessary set items for delivering data to network ❒If [Delivery Option] is set to [On], check that IPv4 Address is set [Delivery Option] Page Page This section describes necessary set items for using TWAIN Scanner under the network environment Page Page This section describes necessary set items for using Document Server function under the network environment Page Network Guide Interface Settings [Interface Settings] ❖ [Network]→[Machine IPv4 Address]→[Auto-Obtain(DHCP)] ❖ [Network]→[Machine IPv4 Address]→[Specify]→[IPv4 Address] ❖ [Network]→[Machine IPv4 Address]→[Specify]→[Sub-netMask] ❖[Network]→[DNS Configuration]→[Specify]→[DNS Server1-3] ❖[Network]→[DDNS Configuration] ❖[Network]→[Domain Name]→[Auto-Obtain(DHCP)] ❖[Network]→[Domain Name]→[Specify] →[Domain Name] ❖[Network]→[WINS Configuration]→[WINS Server] ❖ [Network]→[Effective Protocol]→[NetWare] ❖[Network]→[Effective Protocol]→[Net BEUI] ❖[Network]→[Effective Protocol]→[AppleTalk] ❖[Network]→[NCP Delivery Protocol] ❖[Network]→[NW Frame Type]→[Auto Select] ❖[Network]→[NW Frame Type]→[Ethernet SNAP] ❖[Network]→[SMB Computer Name] ❖[Network]→[SMB Work Group] ❖[Network]→[Ethernet Speed] ❖[Network]→[LAN Type]→[Ethernet] ❖[Network]→[Host Name] ❖[Network]→[Machine Name] ❖[IEEE 1394]→[IPv4 Address]→[Auto-Obtain(DHCP)] ❖[IEEE 1394]→[IPv4 Address]→[Specify]→[Machine IPv4 Address] ❖[IEEE 1394]→[IPv4 Address]→[Specify]→[Sub-netMask] ❖[IEEE 1394]→[WINS Configuration]→[Scope ID] ❖[IEEE 1394]→[Host Name] ❖[IEEE 1394]→[Domain Name] ❖[IEEE 802.11b]→[Communication Mode] ❖[IEEE 802.11b]→[SSID Setting] ❖[File Transfer]→[Delivery Option] ❖[File Transfer]→[SMTP Server]→[Server Name] ❖[File Transfer]→[SMTP Server]→[Port No.] ❖[File Transfer]→[SMTP Authentication] ❖[File Transfer]→[POP before SMTP] ❖[File Transfer]→[Administrator's E-mailAddress] ❖[File Transfer]→[E-mailCommunication Port] ❖[File Transfer]→[E-mailReception Interval] ❖[File Transfer]→[Max. Reception E-mailSize] ❖[File Transfer]→[E-mailStorage in Server] ❖[File Transfer]→[Default User Name/Password (Send)]→[FTP Password] ❖[File Transfer]→[Default User Name/Password (Send)]→[NCP User Name] ❖[File Transfer]→[Default User Name/Password (Send)]→[NCP Password] ❖[File Transfer]→[Program/Change/Delete E-mailMessage]→[Program/Change] ❖[File Transfer]→[Program/Change/Delete E-mailMessage]→[Delete] 2. System Settings ❖Warm–upBeeper (copier/Document Server) ❖Copy Count Display (copier/Document Server) •Up ❖Function Priority •Copier ❖ Interleave Print [Print Priority] 10 sheets ❖ Status Indicator ❖Screen Color Setting ❖Output: Document Server (Document Server) •Finisher Upper Tray • Finisher Booklet Tray ❖Output: Printer (printer) •Finisher Booklet Tray ❖System Status/Job List Display Time 15 second(s) ❖ Time Interval between Printing Jobs 3 seconds • Set Time ❖Z-foldposition 2 mm (metric version) 0.1 inch (inch version) [Off] [Timer Settings] ❖Auto Off Timer 90 minute(s) 120 minute(s) ❖Energy Saver Timer ❖Printer Auto Reset Timer (printer) ❖ Scanner Auto Reset Timer (scanner) ❖Set Date ❖Set Time ❖Auto Logout Timer ❖Weekly Timer: Monday-Sunday [Network] ❖Machine IPv4 Address [Specify] [Machine IPv4 Address] [Sub-net ❖IPv6 Stateless Address Autoconfiguration •Active ❖DNS Configuration [DNS Server] ❖DDNS Configuration ❖NCP Delivery Protocol •TCP/IP Priority •Auto Select ❖SMB Computer Name ❖SMB Work Group ❖LAN Type •Ethernet ❖Ping Command ❖Permit SNMPv3 Communication •Encryption/Clear Text [Parallel Interface] ❖ Parallel Timing •ACK outside ❖Parallel Communication Speed •High Speed ❖ IPv4 Address ❖IPv4 over [IP over 1394] ❖SCSI print (SBP-2) [SCSI print (SBP-2)] ❖ Communication Mode •802.11 Ad-hoc ❖SSID Setting ❖Channel ❖Security Method ❖Transmission Speed ❖Restore Factory Defaults B Press [Interface Settings] C Press [Print List] D Press the {Start} key Start E Press [Exit] F Press the {User Tools} key [File Transfer] ❖ Delivery Option ❖Capture Server IP Address ❖SMTP Server [Server Name] ❖SMTP Authentication [SMTP Authentication] [User Name] [Password] [Encryption] ❖ Reception Protocol • POP3 ❖POP3/IMAP4 Settings •Auto ❖Administrator's E-mailAddress ❖E-mailReception Interval •On: 15 minute(s) ❖Max. Reception E-mailSize •2MB ❖E-mailStorage in Server ❖Program/Change/Delete E-mailMessage BPress [File Transfer] DPress [Program/Change] EPress [Not Programmed] FPress [Change] ❖Scanner Resend Interval Time 300 second(s) ❖ Number of Scanner Resends •On: 3 time(s) [Administrator Tools] [System Settings ] ❖Address Book Management ❖Address Book: Program/Change/Delete Group ❖Address Book: Change Order [OPQ] [CD] B Press [Administrator Tools] Page ❖ Print Address Book: Destination List BPress [Administrator Tools] CPress [Print Address Book: Destination List] [Print on 2 Sides] ❖Address Book: Edit Title ❖Address Book: Switch Title • Title ❖Back Up / Restore Address Book ❖Display / Print Counter ❖Display / Clear / Print Counter per User ❖User Authentication Management ❖Enhanced Authentication Management ❖Administrator Authentication Management ❖Program/Change Administrator ❖Key Counter Management ❖Extended Security ❖Auto Delete File in Document Server •On: 3 day(s) ❖ Program / Change / Delete LDAP Server C Press [Program/Change/Delete LDAP Server] ❖LDAP Search [Search LDAP] ❖AOF (Always On) ❖Firmware Version ❖Network Security Level To program / change the LDAP server To delete the programmed LDAP server To enter an identification name To enter a server name To enter the search base To enter a port number To start SSL communication To set authentication To enter the user name and password To test the connection To set search conditions To set search options E Enter the key display, and then press [OK] [Combined Copying] ❖Warm Up Notice (copier/Document Server) ❖Interleave Print ❖Output: Copier ❖Output: Printer ❖ADF Original Table Elevation ❖Key Repeat ❖Power Off Timer ❖ System Auto Reset Timer ❖ Copy/Document Server Auto Reset Timer ❖ Printer Auto Reset Timer ❖ Scanner Auto Reset Timer ❖Print Address Book: Destination List ❖Address Book: Select Title ❖Display/Print Counter ❖Display/Clear/Print Counter per User ❖ Program/Change Administrator ❖Program/Change/Delete LDAP Server ❖Erase All Memory ❖Delete All Logs ❖Data Security for Copying ❖Back Up Printing: Delete All Documents ❖Back Up Printing: Settings for Compressing 3. Tray Paper Settings C Change settings, and then press [OK] ❖Tray ❖ The paper types ❖The paper sizes (without the LCT, A3 / 11”⋅17” Tray Unit TK5000) ❖The paper sizes (utilizing the LCT, A3 / 11”⋅17” Tray Unit TK5000) ❖Copying Method in Duplex •1 Sided Copy ❖Apply Auto Paper Select ❖Thick Paper Setting ❖Designation Sheet 1 ❖Slip Sheets ❖Separation Sheets ❖Tray 2 ❖The paper types ❖ The paper sizes ❖ Copying Method in Duplex • 1 Sided Copy ❖ Apply Auto Paper Select • Yes ❖ Back Cover [At Mode Selected ] ❖ Slip Sheets ❖The paper types utilizing LCIT RT5000 (A4 LCT) ❖The paper types utilizing LCIT RT5010 (A3 LCT) ❖The paper sizes utilizing LCIT RT5000 (A4 LCT) ❖The paper sizes utilizing LCIT RT5010 (A3 LCT) Page Page ❖ The paper types utilizing LCIT RT5010 (A3 LCT) Page Page ❖ The paper types utilizing LCIT RT5000 (A4 LCT) Page Page Page Page ❖Interposer Upper - Lower ❖The paper sizes [No] [Apply Auto Paper Select] [Do not Dis- play] [Recycled Paper] ❖Paper Tray Priority: Copier (Copier/Document Server) ❖Paper Tray Priority: Printer (Printer) ❖Paper Type: Tray 1 (LCT) ❖Paper Type: Tray 2 ❖Paper Type: Tray ❖Paper Type: Interposer Upper - Lower 4.Copier/Document Server Features ❖Reserve Job Mode •Previous job ❖Reservation Screen Auto-offTimer 15 seconds ❖Max. Copy Quantity ❖ Text ❖Text/photo •Normal ❖Photo ❖Pale ❖Generation Copy ❖Dark Background ❖Panel Features Default ❖Image Adjustment Priority ❖Paper Display •Display ❖Special Original Display Defaults ❖Tone: Original Remains ❖Job End Call ❖Connect Copy Key Display [Connect Copy] ❖Customize Function: Copier ❖ Customize Function: Document Server Storage Copy/ Document Server Reference "Selecting Copy Paper", Copy/ Document Server Reference [Reproduction Ratio] [Copier/Docu- ment Server Features] ❖Shortcut R/E 71% 141% 73% 155% ❖R/E Ratio [Re- duce/Enlarge] Page ❖R/E Ratio Priority [Reduce / Enlarge] ❖Ratio for Create Margin 93% [Copier/Document Server Features ] ❖Front Margin: Left/Right •Left Left 5 mm Left 0.2 ❖Back Margin: Top / Bottom ❖1 Sided → 2 Sided Auto Margin: TtoT •Right Default: ❖1 Sided → 2 Sided Auto Margin: TtoB ❖Creep Setting for Magazine ❖Erase Original Shadow in Combine ❖Erase Center Width ❖Front Cover Copy in Combine •Combine ❖Copy Order in Combine ❖Orientation: Booklet, Magazine •Open to Left ❖Copy on Designating Page in Combine ❖Image Repeat Separation Line •None ❖Double Copies Separation Line ❖Separation Line in Combine ❖ Copy Back Cover • Outside ❖ Double Copies Position Same Position as Original Image Position "Booklet/Magazine", Copy/ Document Server Reference [Stamp] [Background Numbering] ❖Size ❖Density [Preset Stamp] ❖Stamp Priority •COPY ❖Stamp Format •1X •All Pages "Preset Stamp", Copy/ Document Server Reference [User Stamp] ❖Program/Delete Stamp ❖Stamp Format:1-5 •1st Page Only Copy/ Document Server Reference"User Stamp [Date Stamp] ❖Format DD/MM/YYYY MM/DD/YYYY ❖Font ❖Stamp Setting •Top Left [Page Numbering] •P1,P2… ❖Duplex Back Page Stamping Position •Opposite Position ❖Page Numbering in Combine •Per Original ❖Stamp on Designating Slip Sheet [Copy] ❖Stamp Position ❖Page Numbering Initial Letter •P1, P2, ... / P.1, P.2 [Stamp Text] • Auto ❖ Superimpose ❖ Stamp Setting • Top Right Page [Input/Output] ❖ SADF Auto Reset 5 second(s) ❖ Copy Eject Face Method in Glass Mode • Face Up ❖Staple Position ❖Punch Type ❖Finisher: Staple Position ❖Finisher: Punch Type ❖ Simplified Screen: Finishing Types Troubleshooting "Sort", Copy/ Document Server Reference For details, see "System Settings", and "Copier/Document Server Features ❖Copier/Document Server Features items Default 2 Sided original: ❖Original Counter Reset Key ❖Text ❖Text/Photo ❖Special Original Display Default ❖Customize Function: Document Server Storage ❖ Front Margin: Left/Right ❖ Back Margin: Left/Right ❖Back Margin: Top/Bottom Page ❖Copy Back Cover ❖Double Copies Position Background Numbering Preset Stamp ❖Dup. Back Pg. Stanp Pos User Stamp Date Stamp ❖Dup. Back Pg. Stamp Pos Page Numbering Stamp Text ❖Page to Stamp ❖SADF Auto Reset ❖ Stapling Position ❖ Select Punch Type ❖ Finisher: Staple Position ❖Simplified Screen: Finishing Types 5. Printer Features ❖PDF Configuration/Font Page ❖Hex Dump A Press [Printer Features] B Press [Configuration Page]] on the [List / Test Print] C Press the {User Tools} key ❖System Reference ❖Paper Input ❖System ❖PCL Menu ❖PS Menu ❖Host Interface ❖Interface Information ❖List / Test Print Lock [List/Test Print] ❖Delete All Temporary Print Jobs ❖Delete All Stored Print Jobs [System] ❖Print Error Report ❖Auto Continue ❖Memory Overflow •Do not Print ❖ Initial Print Job List [Print Jobs] • Complete List ❖ Memory Usage • Frame Priority ❖ Spool Image ❖ Reserved Job Waiting Time • Short Wait ❖Printer Language ❖ Sub Paper Size ❖Letterhead Setting ❖Bypass Tray Setting Priority •Driver / Command ❖Edge to Edge Print ❖Default Printer Language •PCL ❖Tray Switching [Host Interface] ❖I/O Buffer •128KB ❖I/O Timeout [PCL Menu] ❖Orientation •Portrait ❖Form Lines ❖Font Source ❖ Symbol Set PC-8 ❖ Courier Font • Regular ❖ Extend A4 Width [PS Menu] ❖Data Format •TBCP [PDF Menu] ❖Change PDF Password ❖PDF Group Password Page 6. Scanner Features Address] [Folder] •E-mailAddress ❖Print & Delete Scanner Journal ❖Print Scanner Journal [Scan Settings] ❖A.C.S. Sensitivity Level [Scan Type] [Auto Color Selection] ❖Wait Time for Next Orig.: Exposure Glass ❖Wait Time for Next Original(s): SADF ❖Background Density of ADS (Full Color) "Batch, SADF", Scanner Reference Scanner Reference [Send Settings] ❖Compression (Black & White) ❖Compression (Gray Scale / Full Color) •On: Compression Level ❖High Compression PDF Level ❖Divide & Send E-mail [Max E-mail Size] •Yes (per Max. Size): 7.Registering Addresses and Users for Scanner Functions ❖Protection ❖E-mail ❖Folder ❖Add to Group [Address Management Tool] Preventing unauthorized user access to shared folders from the machine G H Press [OK] twice [Freq.] [AB] [EF] [GH] F G H [Printer: PC Con trol] F Press [Auth. Info] G Enter the user code using the number keys, and then press {#} key Clear/Stop H Press [TNext] twice I Select the functions to be used with the user code from Available Functions E Select the user whose user code you want to change G Press [Change], and then enter the new user code using the number keys H Press {#} key [Auth. Info] J Press the key to select the functions to enable them K L M D Press [Program/Change] E Select the name whose code is to be deleted Press [Change] to delete the user code, and then press {#} key C Press [Display/Clear/Print Counter per User] [Copier Counter] [Print Counter] [Scanner Counter] D Select a user code from the left side of the display [Select All on the Page] E Press [Print Counter List] under Per User [Print Counter List] Page Page Page F Press [E-mail] G Press [Change] H Enter the e-mailaddress I Press [OK] J Select [E-mail] [E-mail] E Select the name whose e-mailaddress you want to change G Press [Change] under E-mailAddress H Enter the e-mailaddress, and then press [OK] Using the e-mailaddress as the sender A Press [Protection] F G H I J Press [E-mail] Press [Change] under E-mailAddress Press [Delete All] Registering a Folder Page R Press [Exit] To locate the folder manually A Press [Change] under Path 7B Enter the path where the folder is located Using Browse Network to locate the folder A Press [Browse Network] B Select the work group C Select a client computer [Up One Level] 7F G Press [Folder] Select the items you want to change H Press [Connection Test] to check the path is set correctly J Press [Exit] To change the protocol A Press [FTP] or [NCP] B A confirmation message appears. Press [Yes] C Enter each items again Changing SMB settings Deleting a registered folder [System Settings] Select the name whose folder you want to delete Press [ Folder] Press the protocol which is not currently selected E Select the name whose folder you want to register L Enter the password again to confirm, and then press [OK] M Press [Folder] Page Z Press [Exit] [Do not Specify] Check that [Program/Change] is selected Select the name whose folder you want to change, and then press [Folder] Press [Connection Test] to check the path is set correctly 7A Press [SMB], or [NCP] [NCP] Changing items under FTP A Press [Change] under “Port Number” B Enter the new port number, and then press {#} C Press [Change] under Server Name D Enter the new server name, and then press [OK] 7A Press [System Settings] G Press [Specify Other Auth. Info] on the right side of Folder Authentication 212H Press [Change] under Login User Name N Press [NCP] O A confirmation message appeares. Press [Yes] P Select "Connection Type [NDS] [Bindery] B Enter the path where the folder is located C [OK] D Press [Connection Test] to check the path is set correctly 7 Using Browse Network to locate the folder C Search for the destination folder in the NDS tree or NetWare server Changing a registered folder E Select the user of the registered folder you want to change Select "Connection Type Specify the folder I Press [Connection Test] to check the path is set correctly Changing NCP settings A Select the type of connection B Press [Change] of path name D Press [Connection Test] to make sure the path is correctly set up [Set] D Check that [Proglam/Change] is selected [Proglam/Change] E Select a user of the folder you want to delete J [Exit] To add names to a group, the groups must be registered beforehand ❒The maximum number of destinations registerable to a group is Press [New Program] Press [Change] under Group Name Enter the group name, and then press [OK] H Press the title key under Select Title, if necessary •[AB], [CD], [EF], [GH], [IJK], [LMN], [OPQ], [RST], [UVW], [XYZ], [1] to [10]… Select the name to register in a group Press [Add to Group] Select a group to which you want to add the name to C Press [Address Book: Program / Change / Delete Group] E Select the group that you want to put into another group F Press [Add to Group] Page E Select the group where the members you want to check is egistered F Press [Programmed User/Group] G Press [OK] E Select the name to remove from a group Page E Select the group that you want to delete from G Select the group that you want to delete from E Press the group key you want to change K Press the {#} key L Press [OK] Page E Select the name whose protection code you want to register F Press [Protection] G Press [Destination] or [Sender] under Use Name as [Destination] [Sender] H Press [Change] under Protection Code 7F Press [Protection] G Press [Folder Destination] under Protection Object [Folder Destination] I Enter a protection code using the number keys, and then press the {#}key G Press [Specify Other Auth. Info] on the right side of SMTP Authentication H Press [Change] under Login User Name M [OK] G Press [Specify Other Auth. Info] on the right side of LDAP Authentication M Press [OK] 8. Other User Tools ❖Consumables ❖Machine Maintenance/Repair ❖Sales Representative A Press [Inquiry] B Press [Print Inquiry List] C Press the {Start} key D Press [Exit] twice A Press {Counter} key B To print a counter list, press [Print Counter List] ❖The counter increments at the functions below: ❖The counter does not count at the functions below: Page 9. Appendix Feed ❖Shift Image With Feed ❖1-710-001 :Front Side ❖1-710-002 :Back Side ❖1-710-003 :Front Side (Low Speed Mode) ❖1-720-002 :Tray ❖1-720-003 :Tray ❖1-720-004 :Tray 4 LCT ❖1-720-005 :Tray 5 LCT ❖1-720-006 :Tray 6 LCT ❖Set Fusing Temparature ❖1–740–001 :Set Fusing Temparature ❖Double-FeedDetection ❖1-908-001 :Tray ❖1-908-002 :Tray ❖ CIS Img Pos Adj: Feed Setting ❖ 1-911-001 :Tray ❖ 1-911-002 :Tray ❖ 1-911-003 :Tray ❖ 1-911-004 :Tray 4 (LCT Tray 1) ❖2-750-002 :Copy Image: Back Side ❖2-750-003 :Print Image: Front Side ❖2-750-004 :Print Image: Back Side ❖Magnification Adjustment With Feed ❖2–760–001 :Magnification Adjustment With Feed Process ❖Select Test Pattern ❖3–740–001 :Select Test Pattern ❖Reset to Defaults ❖3–740–002 :Reset to Defaults ❖6-700-005 :B5 SEF ❖6-700-006 :B5 LEF ❖6-700-007 :DLT SEF ❖6-700-008 :LG SEF ❖6-700-009 :LT SEF ❖Adjust Punch Hole : With Feed ❖6-705-001 : 2-Hole:JPN ❖6-705-002 : 3-Hole:NA ❖6-705-003 : 4-Hole:Europe ❖6-705-004 : 4-Hole:NA ❖6-730-002 :B4 SEF ❖6-730-003 :A4 SEF ❖6-730-004 :B5 SEF ❖6-730-005 :12 x 18 SEF ❖6-730-006 :DLT SEF ❖6-730-009 :Custom Size ❖Adjust Booklet Fold Position ❖6-735-001 :A3 SEF ❖6-735-002 :B4 SEF ❖6-735-003 :A4 SEF ❖6-735-006 :DLT ❖6-735-007 :LG ❖6-735-008 :LT SEF ❖6-735-009 :Custom Size ❖ Configuration: ❖ Original scanning: ❖ Copy process: ❖ Development: ❖ Fusing: ❖Copy paper weight: ❖Non-reproductionarea: ❖First copy time: ❖Copying speed: ❖ Reproduction ratio: Preset reproduction ratios: • Enlargement Metric version: 400 %, 200 %, 141 %, 122 %, 115 % Inch version: 400 %, 200 %, 155 %, 129 %, 121 % ❖Power consumption (Type 2: 110 copies/minute model): ❖Power consumption (Type 3: 135 copies/minute model): ❖ Dimensions (W ⋅ D ⋅ H up to exposure glass): 870 ⋅ 858.5 ⋅ 1,000 mm, 34.23" ⋅ 33.78" ⋅ 39.34 ❖ Space for main machine (W ⋅ D): ❖Noise emission *1 (Type 2): ❖Noise emission *1 (Type 3): ❖Weight: Type 1, 2: Approx. 299kg, 659.2lb (main machine with the ADF) Type 3: Approx. 305kg, 672.4lb (main machine with the ADF) ❖HDD: 160 GB ⋅ ❖HDD (Document Server): 45 GB ❖Capacity: ❖Mode: ❖Original size: ❖Original weight: ❖Number of originals that can be set: ❖Power Source: ❖Paper size: ❖Paper weight: ❖Stack capacity: ❖ Paper size: ❖ Paper weight: ❖Stack capacity after stapling ❖Staple position: ❖Power consumption: ❖Dimensions (W ⋅ D ⋅ H): ❖Saddle stitch paper weight: ❖ Paper capacity: ❖ Power consumption (Max): ❖ Dimensions (W ⋅ D ⋅ H): ❖ Weight: Page ❖Power consumption ❖Paper capacity: ❖Dimensions (W ⋅ D ⋅ H, option unit): Page ❖A3 / 11" ⋅ 17" Tray Unit TK5000 ❖Copy Connector Type ❖Copy Data Security Unit Type E ❖Data OverWriteSecurity Unit F Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Guide Settings General Instructions Operating