Microsoft PRO 1106EX, PRO 1356EX, PRO 906EX Top, •Top, •Left, [Edit], •Right, Left 0.2, bold type, Left 5 mm, Right 0.2, Right 5 mm, Top/Bottom 0 mm, ❖Back Margin: Left/Right, ❖Front Margin: Left/Right

Copier/Document Server Features

Edit

This section describes various items of [Edit] under [Copier/Document Server Features ].

Default settings are shown in bold type.

Enter the width of the binding margin with the number keys as follows:

•Metric version: 0–30 mm (in increments of 1 mm)

•Inch version: 0"-1.2" (in increments of 0.1 inch)

Enter the width of the erased margin with the number keys as follows:

•Metric version: 2–99 mm (in increments of 1 mm)

•Inch version: 0.1"-3.9" (in increments of 0.1 inch)

4 An image of approximately 1.5 mm (0.06”) will not be displayed as the width of the separation line, when specifying solid or broken lines.

❖Front Margin: Left/Right

You can specify left and right margins on the front side of copies in Margin Adjustment mode.

•Left

•Right

Default:

•Metric version: Left 5 mm

•Inch version: Left 0.2"

❖Back Margin: Left/Right

You can specify left and right margins on the back side of copies in Margin Adjustment mode.

•Left

•Right

Default:

•Metric version: Right 5 mm

•Inch version: Right 0.2"

❖Front Margin: Top/Bottom

You can specify top and bottom margins on the front side of copies in Margin Adjustment mode.

•Top

•Bottom

Default:

•Metric version: Top/Bottom 0 mm

•Inch version: Top/Bottom 0.0"

124