Copier/Document Server Features

❖Reserve Job Mode

You can set whether to reset the mode to the initial state or return to the mode in use before the reserved operation was started when you return to the initial screen after reserved copying finishes.

•Reset

•Previous job❖Reservation Screen Auto-off Timer

You can set the time required until the display is switched to the reserved first job display after reservation is set.

If you select “Switch”, use the numbers keys to enter the time (10-99 seconds). The default setting is 15 seconds.

•Yes

 

• No

4

❖Max. Copy Quantity

The maximum copy quantity can be set between 1 and 9999. The default setting is 9999 sheets.

❖Original counter reset key

You can set whether to enable the document counter reset key.

•On

•Off

❖Auto Tray Switching

When the paper runs out during copying, it can be automatically fed from a sub- stitute paper feed tray, irrespective of the orientation of paper in that tray – pro- vided it is the same size as that set in the other paper feed tray during automatic paper selection. This function is called “Auto Tray Switching”. You can set whether to perform the Auto Tray Switching.

•With Image Rotation

You can copy using the Auto Tray Switching function. Depending on the function being performed rotation may not be possible.

•Without Image Rotation

You can make continuous copies provided paper of the same size and ori- entation is loaded. The “Supply paper” message appears when paper of the same size and orientation runs out. Copying is interrupted when this happens.

•Off

The “Supply paper” message appears when paper runs out. Copying is in- terrupted when this happens.

114