Microsoft PRO 1106EX, PRO 1356EX, PRO 906EX Host Name, ❖Host Name, Domain Name, ❖Domain Name, ❖ IPv4 Address, DDNS Configuration, ❖DDNS Configuration

Interface Settings

IEEE 1394

This section describes various items of [IEEE 1394] under [Interface Settings].

[IEEE 1394] is displayed when this machine is installed with the IEEE 1394 interface board (optional).

❖ IPv4 Address	2
When you connect the machine to a network using the IEEE 1394 interface,

you must configure the IP address and subnet mask.

When you select [Specify], enter the [Machine IPv4 Address] and [Sub-net Mask] as “xxx.xxx.xxx.xxx”(“x” indicates a number).

When you use the IEEE 1394 interface on a network, you cannot use the Eth- ernet interface in the same domain. To use both interfaces in the same do- main, set different values for the [Sub-net Mask].

If you use the interface for Ethernet and IEEE 1394 (IP over 1394) at the same time, settings must be made carefully.

•Auto-Obtain (DHCP)

•Specify

•Machine IPv4 Address: 000.000.000.000

•Sub-net Mask: 000.000.000.000

❖DDNS Configuration

You can specify the DDNS settings.

•Active

•Inactive

❖Host Name

Specify the host name.

Enter the host name using up to 63 alphanumerical characters.

❖Domain Name

Make settings for the domain name.

•Auto-Obtain (DHCP)

•Specify

Enter the domain name using up to 63 alphanumerical characters.

57