Microsoft 9HR-00001, V900, 7XR-00001, 9SR-00001 manual Setup, Plug in and turn on

Setup

Ready to set up your Surface? Let’s go!

Plug in and turn on

Plug in Surface and turn it on. Here's how:

1.If you have one, attach the Touch Cover or Type Cover keyboard to your Surface. When the keyboard gets close to Surface, it clicks into place.

2.Flip out the kickstand on the back of Surface.

3.Plug the power cord into a wall outlet or power strip.

4.Connect the power cord on the lower right side of your Surface.

The connector clicks into place (either direction works). The small light at the end of the connector means Surface is getting power.

5.Press and release the power button, which is on the top right of the device.

© 2013 Microsoft Page 4