UK
MIDLAND BTX1
Basic Intercom System
BTX1 is an intercom communication system solution for motor cyclists.The design is very slim and aerodynamic, all the main functions are easy to operate thanks to the big three buttons placed on the front of the unit.
BTX1 is fixed on the helmet using the adhesive plate or the screw mounting clamp. Thanks to the audio kit with ultra slim speakers you can enjoy high quality stereo music while riding.
Main features
›› Intercom driver - passanger (10mt).
›› Connect your phone to receive and place phone call and listen to stereo music ›› Connect your GPS for voice street indication
›› Connection for PMR466 radio with internal or external Bluetooth ›› AUX wired connection for MP3 player and PMR446 radio
›› Setup and Firmware update via USB connection to a PC
Midland BTX1 is available in two versions:
›› Single BTX1 Intercom kit with one unit only ›› Twin BTX1 Intercom kit with with two units
Depending on the model purchased, the package contains the following parts:
BTX1 single
›› 1 BTX1 communication unit
›› 1 audio kit with two stereo speakers, microphone with boom and wired mi-
| crophone |
›› | 1 plate with |
›› | 1 clamp to fix the unit onto the helmet |
›› 1 miniUSB
BTX1 Twin
›› 2 BTX1 communication units
›› 2 audio kits with two stereo speakers, microphone with boom and wired mi-
| crophone |
›› | 2 plates with |
›› | 2 clamps to fix the unit onto the helmet |
›› 1 miniUSB wall-mounting power supply with double plug
The units included in the TWIN kit are already paired and can therefore be immedia- tely used in Intercom mode.
Technical specifications of Midland BTX1
General:
›› Bluetooth ver. 3.0 stereo (Headset/Handsfree/A2DP protocol)
›› AGC system automatically controls the volume in relation to background noise ›› Voice (VOX) or manual communications activation
›› Manual controls to enable: telephone, intercom and wire connection ›› Fully waterproof
›› Lithium battery with 10 hours talk time ›› Recharge time: app. 6 hours
Bluetooth connections:
With identical device for Driver to Passanger intercom
Bluetooth devices:
›› Mobile phone with MP3 player Stereo (A2DP protocol), GPS (Garmin Zumo and TomTom Rider 1 and 2)
›› PMR446 transceivers (with
Wire connections:
›› For stereo audio input like iPod/MP3 player (with optional cable) ›› For PMR446 transceivers (with optional cable)
Attention: Midland BTX1 is designed to withstand rain and water. However, if it is raining, always verify that the rubber caps protecting the sockets are fully fitted.
Charging batteries
Attention: Make sure that the unit is fully charged before use. Allow at least 8 hours for a full charge before using the unit for the first time.
Charge the unit by inserting the
The red LED on the unit will start flashing when charging begins.
Allow the headset to charge until the unit stops flashing or the blue LED turns on. When the charge is complete (the red LED is not flashing), release the headset from the charger.
