UK
Talk 2 All - Pairing to a different brand intercom
Thanks to the“Talk2 All - Universal Intercom”feature it is now possible to pair your BTX1 to a different brand intercom available on the market.
1.On the BTX1 enter the setup mode: (With the unit OFF press and hold down the Middle button about 7 sec., until the Red light is on permanently.
2.Press the “Forward” button for 3 seconds, the Red and Blu LED light will flash.
3.On the other intercom (not Midland brand) follow the procedure to pair to a phone.
When successfully paired (no red/blue flashing light), to open the intercom com- munication on the BTX1 follow the instruction “Manual activation”; on the other intercom just press the phone redial button.
Attention: when using this configuration, the other intercom (not Midland brand) will not be able to be paired to a phone.
Pairing the BTX1 to Bluetooth devices
The BTX1 unit can be paired to other Bluetooth devices, like Phone, GPS Navigator or PMR446 Radio with
The pairing procedure must be done using the “Volume +” buttons.
›› Pairing to the “Volume +” button: for Phone or GPS. All devices paired to this button have higher priority and will interrupt all the other communica- tion .
›› Phone |
| ›› Background |
›› GPS |
| feature ON/ |
›› GPS + Phone |
| OFF |
›› PMR446 Radio |
|
|
| ||
|
|
|
Pairing to a phone
The cellular phone can be paired only to the “Volume +”, when paired the “phone mode“ is active. In this way it is possible to manage all the phone functio- nalities and listen to the stereo music. An incoming call the higher priority, that means all other communications will be closed (Intercom, Music).
Pairing to a GPS navigator
The GPS can be paired on the “Volume +” button, when paired the “phone mode “ is active.
Attention: If you need to connect both Phone and GPS, you must pair the Phone to the GPS itself.
Pairing to a PMR446 radio with integrated or external Bluetooth
The PMR446 Radio must be paired to the “Volume +“ button.
Attention: if you pair a PMR446 with Bluetooth, it will not be possible to pair the Phone or the GPS.
Bluetooth connection always in Background
This feature let you keep the Bluetooth connection on the “Volume+” button always in background also if the Intercom is open (very useful to keep the GPS navigator announcement in background while the intercom is open).
Enabling/Disabling the Background feature:
Keep pressed for three second the “Volume
How to pair the BTX1 to a Phone
To pair the BTX1 to a Phone, you must first enter the setup mode:
1.Turn off the unit
2.Press and hold down the middle button about 7 sec., until the Red light is on permanently.
3.Now press for 3 seconds the“Volume +” button, the Blue and Red light will flash.
4.Enable the Bluetooth device search feature on your mobile phone
5.After some seconds, “Midland BTX1” will be displayed on your mobile phone. Follow the pairing procedure of your Phone. If a pin code is requested you
must enter “0000” (four time zero).
When successfully paired, the Blue light of the unit will be on for one second and than the unit will exit the setup mode and switch to the working mode (the Blue light will start flashing).
You can use now your BTX1 together with the Phone.
How to use a Phone
in order to use all the phone/MP3 music player feature. If you are in “Intercom” mode you can only manage the incoming phone call. To activate the “phone” mode, press the middle button until you hear “Phone” from the voice announce- ment. Now all the three main button are dedicated to the phone (see Table B)
Answering a call in both Phone/Intercom mode
When you hear the phone ring, you can answer in two different ways:
