Miele H 4744 BP, H 4746 BP installation instructions Installing the oven

Models: H 4746 BP H 4744 BP

1 64
Download 64 pages 34.35 Kb
Page 62
Image 62
Installing the oven

Installing the oven

The oven must be installed into cabinetry before use.

Do not insulate the cabinet. This will prevent proper ventilation.

￿IMPORTANT INFORMATION Certain cabinet materials and finishes are very sensitive to high temperatures. To eliminate the risk of damage to surrounding cabinets, a 24 square inch (2"x12") [150 cm2] minimum opening must exist in the cabinet to allow air to flow into and around the appliance. In addition, the oven vent at the bottom of the door must not be obstructed.

￿Connect the oven to the electrical supply.

The oven must be supported from underneath.

￿Place the oven into the cabinet as far as the oven trim and align.

￿Open the oven door and locate the two mounting screw holes in the oven frame. Mark and drill 6 mm pilot holes. Secure the oven to the cabinetry by inserting screws through the frame and into the cabinetry.

Only operate the appliance after it has been installed into the cabinetry.

62

Page 62
Image 62
Miele H 4744 BP, H 4746 BP installation instructions Installing the oven