Special Setup Procedure - Column Bumper Installation

13.11 Special Setup Procedure - Column Bumper Installation

Purpose of Column Bumper Special Setup Procedure: Installing Column Bumpers restrict the operating range of the upper assembly in proportion to the size of boxes to be sealed.

This installation results in an increase to the operating speed.

WARNING

To reduce the risk associated with mechanical and electrical hazards:

Turn electrical and air supply off and disconnect before performing any adjustments, maintenance or servicing the machine or taping heads

Allow only properly trained and qualified personnel to operate and/or service this equipment

Installation Instructions - Column Bumper

(A parts package is included with the unit for installation purposes).

The Column Bumper will be located on the column according to the size of the box that is to be taped (Refer to Figure 13-10A).

1.Raise and Lock the Upper Drive Assembly. Important: This procedure is for authorized personnel ONLY!

2.Turn off air supply and electric power.

3.Remove Guard (see Installation and Setup / Figure 7-7), the existing holes for installing Column Bumper should be visible.

4.Remove Column Bumper and set screw parts package from the carton.

5.Position Bumper as needed (the recommended position is shown in Figure 13-10A).

6.After the new Bumper is installed, re-install the Safety Guard (see Installation and Setup Section/Figure 7-7).

7.Turn on air supply and electric power.

* Note - Important: See Figure 15104 for Plate Change. When Column Adjusted to "Raised" Position - Parts #40 and #41 are removed and replaced by Part #42.

Also: DO NOT Use the Bottom Set of Bumper Holes. These Holes are Used in Special Applications ONLY!!!

Important: Some bumper positions may:

1)Allow upper and lower taping heads to come into contact with each other.

2)Create added stress to the bumper.

3)Cause a malfunction of the machine.

These events can potentially cause damage to the machine

Shown is after-

Safety Guard is Removed

Safety Guard

 

 

A

 

 

 

 

Box Ht. Range

 

 

 

4.75"/120mm

 

B

 

Box Ht. Range

 

 

8.00"/2000mm

 

 

 

Box Ht. Range

 

 

 

11.25"/285mm

 

 

 

Box Ht.Range

 

 

14.50"/

 

 

 

375mm

 

 

 

 

 

 

C

 

 

 

 

 

Safety Guard

 

 

Set Screws

 

 

 

& Washers

 

 

Figure 13-10 – Case Sealer Frame Changes

 

 

 

 

 

 

 

 

 

700r-NA

47

2011 July

Page 57
Image 57
3M 40800 operating instructions Special Setup Procedure Column Bumper Installation, Installation Instructions Column Bumper

40800 specifications

3M 40800,800RF is an advanced adhesive tape that has gained popularity across various industries due to its innovative features and versatile applications. This product is characterized by its strong bonding capabilities, durability, and easy application, making it a go-to choice for professionals and DIY enthusiasts alike.

One of the main features of 3M 40800,800RF is its exceptional adhesive strength. Designed to provide a reliable bond on a wide range of surfaces, including plastics, metal, glass, and paper, this tape ensures a strong and long-lasting hold. The adhesive technology utilized in the 3M 40800,800RF is formulated to provide superior performance even in challenging conditions, such as humidity or temperature fluctuations.

Another significant characteristic of this adhesive tape is its shear strength. 3M has engineered the tape to resist slippage and ensure that the bond remains intact over time. This quality is particularly beneficial in applications that require precision and stability, such as automotive and aerospace industries, where any failure in adhesion could lead to serious consequences.

The 3M 40800,800RF also offers remarkable flexibility, allowing it to conform to complex surfaces and irregular shapes. This feature enhances its usability in a variety of settings, enabling users to apply the tape with ease, regardless of the surface profile. Additionally, the tape's easy unwind feature simplifies the application process, reducing the risk of tearing or malfunction.

Another technology that sets 3M 40800,800RF apart is its resistance to chemicals and environmental factors. It is designed to withstand various chemicals, including oils and solvents, which makes it suitable for industrial applications. Furthermore, its ability to endure exposure to UV light without degrading ensures that the tape maintains its properties over extended periods of time, even when used in outdoor settings.

In summary, the 3M 40800,800RF adhesive tape stands out for its strength, flexibility, and versatility. With advanced adhesive technology, excellent shear strength, and high resistance to environmental factors, it is a reliable choice for a wide array of applications. Whether used in manufacturing, automotive, or general maintenance, this adhesive tape delivers exceptional performance, making it a preferred option for consumers looking for quality and reliability.