7-INSTALLATION AND SETUP (continued)

WARNING

•To reduce the risk associated with impact hazards:

−Always use appropriate supporting means when working under the upper drive assembly

•To reduce the risk associated with mechanical and electrical hazards:

−Allow only properly trained and qualified personnel to operate and/or service this equipment

7.11Bumper Supports (Upper Drive Assembly)

With the Safety Guard removed (see Installation and Setup / Figure 7-7):

•Raise and lock the upper drive assembly in the raised position. See "Operation – Mechanical Latch."

•Turn off air supply and electric power.

•Remove the Column Bumper and set screw parts package from the carton.

•Using set screws provided, install Column Bumper (the recommended position is shown Below).

•Re-install Safety Guard.

*Note - Important - Some bumper positions may:

1)Allow upper and lower taping heads to come into contact with each other.

2)Create added stress to the bumper.

3)Cause a malfunction of the machine.

These events can potentially cause damage to the machine. For more information on bumper settings, contact your 3M service representative.

Do Not

Use

Bottom

Holes

7.12 Box Size Capacity of Case Sealer

At its factory setting, the case sealer handles box sizes up to 620mm [24.5 inch] maximum height (See Specif cations Section). If larger capacity is needed, the machine can be adjusted to accom- modate boxes up to 725mm [28.5 inch] high. Refer to "Special Setup Procedure – Box and Machine Bed Height Range."

Note – Adjusting machine to accommodate 725mm [28.5 inch] high boxes also increases minimum box size to 170mm [6.8 inch] - See Parts list.

7.13 Electrical Connections and Controls

The electrical control box and "On/Off" switch are located on the lower left side of the machine frame (Figure 7-13). If desired, for operator convenience, the "On/Off" switch can be relocated to the right side of the machine frame. The receptacle providing this service shall be properly grounded. Before the power cord is plugged in, make sure that all packaging materials and tools are removed from the machine.

Do not plug electrical cord into outlet until ready to run machine.

WARNING

• To reduce the risk associated

with hazardous voltage:

−Position electrical cord away from foot and/or vehicle traffic

7.14Initial Start-Up of Case Sealer

After completing the "Installation and Setup" procedure, continue through "Operation" for tape loading and start-up to be sure case sealer is properly adjusted to run boxes.

700r-NA

24

2011 July

Page 33 Page 35
Page 34
Image 34
3M 40800 Box Size Capacity of Case Sealer, Electrical Connections and Controls, Initial Start-Up of Case Sealer
Page 33 Page 35

40800 specifications

3M 40800,800RF is an advanced adhesive tape that has gained popularity across various industries due to its innovative features and versatile applications. This product is characterized by its strong bonding capabilities, durability, and easy application, making it a go-to choice for professionals and DIY enthusiasts alike.

One of the main features of 3M 40800,800RF is its exceptional adhesive strength. Designed to provide a reliable bond on a wide range of surfaces, including plastics, metal, glass, and paper, this tape ensures a strong and long-lasting hold. The adhesive technology utilized in the 3M 40800,800RF is formulated to provide superior performance even in challenging conditions, such as humidity or temperature fluctuations.

Another significant characteristic of this adhesive tape is its shear strength. 3M has engineered the tape to resist slippage and ensure that the bond remains intact over time. This quality is particularly beneficial in applications that require precision and stability, such as automotive and aerospace industries, where any failure in adhesion could lead to serious consequences.

The 3M 40800,800RF also offers remarkable flexibility, allowing it to conform to complex surfaces and irregular shapes. This feature enhances its usability in a variety of settings, enabling users to apply the tape with ease, regardless of the surface profile. Additionally, the tape's easy unwind feature simplifies the application process, reducing the risk of tearing or malfunction.

Another technology that sets 3M 40800,800RF apart is its resistance to chemicals and environmental factors. It is designed to withstand various chemicals, including oils and solvents, which makes it suitable for industrial applications. Furthermore, its ability to endure exposure to UV light without degrading ensures that the tape maintains its properties over extended periods of time, even when used in outdoor settings.

In summary, the 3M 40800,800RF adhesive tape stands out for its strength, flexibility, and versatility. With advanced adhesive technology, excellent shear strength, and high resistance to environmental factors, it is a reliable choice for a wide array of applications. Whether used in manufacturing, automotive, or general maintenance, this adhesive tape delivers exceptional performance, making it a preferred option for consumers looking for quality and reliability.
Top Page Image Contents