3M 40800 operating instructions Additionalinstructions

14-ADDITIONAL INSTRUCTIONS	15-ENCLOSURES / SPECIAL INFO.
14.1 Information for Disposal of Machine	15.1 Statement of Conformity
The machine is composed of the following materials:	See Section 1.1.

-Steel structure

-Nylon rollers

-	Drive belts in PVC	15.2 Emission of Hazardous Substances
-	Nylon pulleys	Nothing to report

For machine disposal, follow the regulations published in each country.

14.2 Emergency Procedures

In case of danger/fire:

Disconnect plug of power cable from power supply.

(Figure 14-1)

IN CASE OF FIRE

Use a fire extinguisher containing CO2 (Figure 14-2).

Figure 14-1

15.3 List of Safety Features

List of components/assemblies with safety functions

-LATCHING EMERGENCY STOP BUTTON

-Thermal cut-out relay

-Fixed guards upper drive belts

-Blade guard assemblies on both taping heads

-Important: Install earth wire protection on electrical installation.

All safety features/components must be explained and highlighted to all operators and to the person responsible for spare parts in order to ensure that these components are always on hand or ordered as a priority procedure.

ONLY USE ORIGINAL REPLACEMENT PARTS

15.4Copies of Test Reports, Certifications (etc.) Required by User

Electrical tests

1 - Earth continuity

2 - Insulation resistance

3 - High voltage test

Reference; EN60204-1 par. 20.2.,3.,4.

Figure 14-2

700r-NA 53 2011 July