10-SAFETY DEVICES OF THE MACHINE

10.1 Blade Guards

Both the top and bottom taping units have a blade guard (See Manual 2:

AccuGlide™ 3 Taping Heads - 2 inch).

WARNING

To reduce the risk associated with sharp blade hazards:

Keep hands and fingers away from tape cutoff blades under orange blade guards. The blades are extremely sharp.

10.2 Emergency Stop Button

The box drive belts are turned on and off with the electrical switch on the side of the machine frame.

The machine electrical supply can be turned off by pressing the latching emergency stop switch. To restart machine, rotate the emergency stop switch clockwise to release the switch latch. Restart machine by pushing the Start button

(Figure 10-1).

WARNING

To reduce the risk associated with hazardous voltage:

Position electrical cord away from foot and vehicle traffic.

10.3 Electric System / Circuit Breaker

The electric system is protected by a ground wire whose continuity has been tested during the final inspection. The system is also subject to insulation and dielectric strength tests.

Circuit Breaker

The case sealer is equipped with a circuit breaker which trips if the motors are overloaded. Located inside the electrical enclosure on the side of the machine frame just below the machine bed, the circuit breaker has been preset and requires no further maintenance.

Important!

All adjustments and tape loading require that the machine is stopped and the emergency stop button is locked.

Main electric switch "OFF" (O). Severe injury to personnel could result by lack of observing these elementary rules

WARNING

To reduce the risk associated with mechanical and electrical hazards:

Allow only properly trained and qualified personnel to operate and service this equipment.

If circuit is overloaded and circuit breaker trips, unplug machine from electrical power:

1.Determine cause of overload and correct.

2.Plug in machine.

3.Press machine "On" (I) button to resume case sealing.

Important: The use of an extension cord is not recommended. However, if one is needed for temporary use, it must:

Have a wire size of 1.5mm diameter [AWG 16]

Have a maximum length of 30.5m [100 ft]

Be properly grounded.

Figure 10-1

700r-NA

36

2011 July

Page 46
Image 46
3M 40800 Safety Devices of the Machine, Blade Guards, Emergency Stop Button, Electric System / Circuit Breaker

40800 specifications

3M 40800,800RF is an advanced adhesive tape that has gained popularity across various industries due to its innovative features and versatile applications. This product is characterized by its strong bonding capabilities, durability, and easy application, making it a go-to choice for professionals and DIY enthusiasts alike.

One of the main features of 3M 40800,800RF is its exceptional adhesive strength. Designed to provide a reliable bond on a wide range of surfaces, including plastics, metal, glass, and paper, this tape ensures a strong and long-lasting hold. The adhesive technology utilized in the 3M 40800,800RF is formulated to provide superior performance even in challenging conditions, such as humidity or temperature fluctuations.

Another significant characteristic of this adhesive tape is its shear strength. 3M has engineered the tape to resist slippage and ensure that the bond remains intact over time. This quality is particularly beneficial in applications that require precision and stability, such as automotive and aerospace industries, where any failure in adhesion could lead to serious consequences.

The 3M 40800,800RF also offers remarkable flexibility, allowing it to conform to complex surfaces and irregular shapes. This feature enhances its usability in a variety of settings, enabling users to apply the tape with ease, regardless of the surface profile. Additionally, the tape's easy unwind feature simplifies the application process, reducing the risk of tearing or malfunction.

Another technology that sets 3M 40800,800RF apart is its resistance to chemicals and environmental factors. It is designed to withstand various chemicals, including oils and solvents, which makes it suitable for industrial applications. Furthermore, its ability to endure exposure to UV light without degrading ensures that the tape maintains its properties over extended periods of time, even when used in outdoor settings.

In summary, the 3M 40800,800RF adhesive tape stands out for its strength, flexibility, and versatility. With advanced adhesive technology, excellent shear strength, and high resistance to environmental factors, it is a reliable choice for a wide array of applications. Whether used in manufacturing, automotive, or general maintenance, this adhesive tape delivers exceptional performance, making it a preferred option for consumers looking for quality and reliability.