3M 40800 operating instructions Spare Parts Order

16-TECHNICAL DOCUMENTATION AND INFORMATION (continued)

16.3 Spare Parts Order

Replacement Parts Ordering Information and Service

Refer to the first page of this instruction manual "Replacement Parts and Service Information".

Order parts by quoting the following information: (Refer to the Identification Plate on the Machine)

•MACHINE MODEL

•SERIAL NUMBER

•FIGURE NO.

•POSITION

•3M PART NO. (11 DIGITS)

•DESCRIPTION

•QUANTITY

Refer to Manual 2 for recommended taping head spare parts.

Important!

The machine is constantly revised and improved by our designers. The spare parts catalogue is also periodically updated. It is very important that all the orders of spare parts make reference to the serial number of the machine (located on the identification plate on the machine).

The manufacturer reserves the right to modify the machine at any time without notice.

It is suggested that the following spare parts be ordered and kept on hand.

700r
Qty.	3M-Part Number	Description
2	78-8070-1531-4	Belt-Drive W/Hook

(See Manual 2 / Taping Heads)

Tool Kit

A tool kit, part number TBA, is available as a stock item. The kit contains the necessary

open-end and hex socket wrenches for use with the metric fasteners on the case sealer. The threading tool, part number 78-8076-4726-4, contained in above kit is also available as a replacement stock item.

Labels

In the event that any labels are damaged or destroyed, they must be replaced to ensure operator safety. See Section 3 - Safety.

700r-NA 57 2011 July