Miele KM5955, KM5956, KM5948, KM5942, KM5958 To switch a cooking zone off automatically, Timer

Timer

To switch a cooking zone off automatically

It is only possible to programme a cooking zone to switch off automatically if a power setting has already been selected for that zone. All of the cooking zones can be programmed at the same time.

If the time programmed is longer than the maximum operational time allowed, the cooking zone will switch off after the maximum time allowed (see relevant section).

^Select a power setting for the zone you require, e.g. back right, in the usual way.

^Touch the m sensor.

00 appears in the timer display, and the minute minder indicator lamp will flash.

^Touch the m sensor again.

The indicator lamp for the minute minder in the timer display goes out, and an indicator lamp for automatic switch-off of a cooking zone flashes.

^If several cooking zones are being used, touch the m sensor repeatedly until the indicator lamp flashes next to the cooking zone you wish to use this function for, e.g. back right.

The indicator lamps for the cooking zones being used light up clockwise, starting with the front left.

^Touch the - or + sensor until the time you require appears in the display, e.g. 15 minutes.

The time then counts down in minutes. The time remaining can be seen in the display and changed at any time by touching - or +.

If you want to set another cooking zone to switch off automatically, follow the same steps as described above.

If more than one switch-off time is programmed, the shortest time remaining will show in the display, and the indicator lamp for that particular cooking zone will flash. All the other indicator lamps will light up constantly. If you want to check on the remaining time for another zone, touch the m sensor until the indicator lamp for the zone you require flashes.

39