Miele KM5942, KM5956, KM5955, KM5948, KM5958, KM5975 Solid wood and tiled worktops, Flush-fitted hobs

Flush-fitted hobs

Solid wood and tiled worktops

a Wooden frame 13 mm (to be provided on site)

eWorktop

fHob

gGap

Corner radius of the tiled worktop ß R4

As the ceramic glass and the worktop cut-out have a certain dimensional tolerance, gap g can vary (min. 1 mm).

^Make the worktop cut-out as shown in "Building-in dimensions".

^Fix the wooden frame a 7 mm below the top edge of the worktop (see diagram).

^Feed the hob connection cable down through the cut-out.

^Centre the hob f in the cut-out.

^Connect the hob to the mains.

^Check that the hob works.

^Seal the remaining gap g with a silicone sealant that is heat-resistant to at least 160 °C.

Observe the silicone sealant manufacturer's instructions.

For granite and marble tiled worktops, only use silicone sealant that has been especially formulated for granite and marble.

79