Miele KM5952, KM5956, KM5955, KM5948 one of the following has occurred, Problem solving guide

Problem solving guide

... one of the following has occurred:

–The Booster has deactivated early automatically.

–The power level has been reduced.

–The cooking zone is not working in the usual way at the power level set.

The overheating protection mechanism has been triggered (see "Overheating protection").

... the food in the pan hardly heats up or does not heat up at all when the Auto heat-up function is switched on

This could be because:

–there is too much food in the pan.

–the pan is not conducting heat properly.

Select a higher continued cooking setting next time, or start cooking at the highest setting and then turn down to a lower setting manually later on.

... The cooling fan continues to run after the appliance has been switched off.

This is not a fault. The fan will continue running until the appliance has cooled down. It will then switch itself off automatically.

... an F appears in the display for the rear cooking zones, an E appears in the display for the front cooking zones and numbers appear in the timer display.

FE99:

The overheating protection mechanism for the induction coil has been triggered. The cooking zone can be used again as soon as it has cooled down to a safe level.

With other fault messages:

Interrupt the power supply to the hob for approx. 1 minute.

If the problem persists after reconnecting the appliance to the power supply, please contact the Miele Service department.

51