Before using for the first time
4. Reminder to remove transit bars
To avoid the risk of damage, the transit bars must be removed before the machine is used for the first time. See "Installation and connection" for instructions on how to do this.
After removing the transit bars (if this has not already been done by your fitter) press the OK button.
5.Continue preparing the washing machine for use as described in the Operating instruction manual
An initial wash programme now has to be carried out in order to complete the preparation process.
Confirm the message by pressing the OK button.
Your machine is now ready for the first programme to be run.
15:00
Select programme
6. Run your first programme
The washing machine has a sensor which measures the amount of laundry in the drum. This determines the amount of detergent required which appears as a recommendation in the display. To enable the load size sensor to function correctly, you must first run a Cottons 60°C programme without any laundry and without detergent.
Open the stopcock.
Turn the programme selector to Cottons.
Cottons
60°C | 1600 rpm |
|
|
|
|
Duration: | 2:59 h |
Press the Start/Stop button.
At the end of the programme switch the machine off.
The washing machine is now ready for use.
17
