Levelling the machine | Miele W 5964 WP guide

Installation and connection

Levelling the machine

The machine must stand perfectly level on all four feet to ensure safe and proper operation.

Incorrect installation may increase electricity and water consumption and may cause the machine to move about.

Screwing out and adjusting the feet

The four adjustable screw feet are used to level the machine. All four feet are screwed in when the machine is delivered.

Using the spanner supplied turn counternut 2 in a clockwise direction. Then turn counternut 2 together with foot 1 to unscrew.

Use a spirit level to check the machine is standing level.

Hold foot 1 securely with a pipe wrench. Turn counternut 2 again using the spanner supplied until it sits firmly up against the housing.

All four counternuts must be firmly up against the housing. Please also check this for the feet which did not need adjustment. Otherwise there is the danger of the machine moving about.

64

Image 64

Miele W 5964 WP operating instructions Levelling the machine, Screwing out and adjusting the feet

Contents

Operating instructions For Washing machine W 5964 WPS Disposal of the packing material Caring for our environmentDisposal of your old machine Contents Opening the drum door in the event of a blocked drain outlet Contents Correct application Safety with children Technical safety Page Correct use Page Accessories Operating the washing machine Control panel Display Programme selection examples Optional programme packages Following are selected via Further programmes/SettingsFollowing are selected via the display Before using for the first time Preparing the washing machineWelcome screen Set the language Reminder to remove transit bars Run your first programme Calibrating the load sensor to zero When drying with a tumble dryer Washing environmentally and economicallyEnergy and water consumption Detergent Brief instructions How to wash correctlySort the laundry Switch on the washing machine Select a programme Select a temperature / spin speed Select an extra options Load the drum 25% Add detergent 100% Select Delay start if required Start the programme Programme end unload the drum Extra options Steam smoothingStains Short Further extras ShortExtra Spinning Final spin speedRinse and interim spin To omit the final spin Rinse hold Delay start To select delay startTo change delay start To cancel delay start Programme chart Cottons Cold to 90C Max. load 8.0 kgCottons Eco60/Eco40 Max. load 8.0 kg Minimum iron Cold to 60C Max. load 3.5 kg Woollens Cold to 40C Hygiene 30C to 90CExpress Cold to 40C Freshen up Shirts Cold to 60C Max. load 2.0 kg Denim Cold to 60C Max. load 3.0 kgDark garments Cold to 60C Max. load 3.0 kg Drain / Spin Trainers Cold to 40C Max pairs of shoes Outerwear Cold to 40C Max. load 2.5 kgProofing 40C Max. load 2.5 kg Soft toys Cold to 40C Max. load 1.0 kg First wash Cold to 40C Max. load 3.0 kg Silks Cold to 30C Max. load 1.0 kgPillows Cold to 90C Pillow 80 x 80 cm Garment care label symbols Programme sequence Main wash Rinses Spinning Special features in the programme sequences Cancelling a programme Changing the programme sequenceInterrupting a programme Changing a programme Safety lock To activate the safety lockTo deactivate the safety lock Adding or removing laundry after a programme has started Detergent Correct detergent Detergent Water softeners Right amount to dispense will depend on the followingWashing with several components Colour run and dye removers/ dyes Fabric conditioners and liquid starchAdding fabric conditioner or starch separately Cleaning and care Cleaning the drum Hygiene infoCleaning the detergent dispenser drawer External casing and fascia panel Cleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Problem solving guide Programme does not start One of the following fault messages appears in the display Fault message Possible cause Remedy1 Fault message Possible cause Remedy Problem Possible cause Remedy Display indicates When the drum isFault message Load of 25% or no General problems Problem Possible cause Remedy Large amounts Detergent residue remainDispenser drawer Fabric conditioner is not Door will not open Procedure for draining the machine Blocked drain outlet Opening the drum door After sales service Future updates PCGuarantee Optional spare parts and accessories Installation and connection Front view Rear view Transporting the washing machine to its installation site Installation surfaceRemoving the transit bars Installation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machine Washer and Dryer stack Building under a continuous worktop/in a kitchen runPlease note Electronic unit and washing machine housing Miele Waterproof systemInlet hose Drain hose Connection to the water supply Maintenance and care Extension hose Connection to the drainage system Drain hose connection Non-rewireable plugs BS Electrical connection U.K Technical data Consumption data Consumption data Language Settings menuTime Gentle action Longer pre-wash Cottons To use the washing machine when the lock code is activated Lock codeTo activate the lock code To enter the lock code Temperature unit BuzzerKeypad tone Brightness Anti-crease Standby display MemoryNot in current prog Optional accessories CareCollection UltraWhite detergent UltraColor detergent for coloured garmentsLiquid detergent For Delicates Fabric conditionerPage Page Page Alteration rights reserved/0712/W 5964 WPS Nr 312 510