Installation and connection

The fitting of building-under kits* and stacking kits* must only be undertaken by qualified and competent persons, in accordance with the instructions supplied with the kit.

Building under a continuous worktop/in a kitchen run

If you wish to push your machine under a worktop and there is space to do this without removing the lid, the conversion kit is not necessary. Otherwise the conversion kit is essential.

A special building-under conversion kit* is required.

To ensure electrical safety, the washing machine lid must be replaced by the cover plate supplied with the conversion kit.

For installation under a work surface 900/910 mm from the floor, a raising kit* is required.

Connections for electricity, water and drainage should be installed in such a way that they remain accessible when the machine is in place.

Fitting instructions are supplied with the conversion kit.

All parts marked* are available from your Dealer, the Miele Spare Parts Department or via the internet at www.miele-shop.com.

Washer and Dryer stack

A Miele tumble dryer can be stacked with the washing machine. A "WTV" stacking kit* is necessary.

Please note:

aSafety distance to wall: at least 2 cm

bHeight:

Stacking kit with pull-out shelf: approx. 169 cm

Stacking kit without pull-out shelf: approx. 170 cm

65

Page 65
Image 65
Miele W 5964 WP Building under a continuous worktop/in a kitchen run, Washer and Dryer stack, Please note