One of the following fault messages appears in the display
Fault message Possible cause Remedy1)
2Fault
Water intake
Open stopcock
The water inlet is
blocked or
restricted.
Check whether
–the stopcock is
opened properly.
–the inlet hose is kinked.
–the water pressure is
too low.
2Fault
Check drainage
system
–The water outlet is
blocked or
restricted.
– The drain hose
has been fixed
too high.
–Clean the drain filter
and the drain pump.
–The maximum delivery
head is 1 m.
LWaterproof system
activated
Close the stopcock
The water protection
system has reacted.
– Close the stopcock.
– Call the Service
Department.
;Technical fault xxx
Call Service There is a fault. Start the programme
again.
If the fault message
appears again, contact
the Service Department.
1) To switch off the fault message: Switch the machine off with the Kbutton.
Problem solving guide
50