Connection to the water supply | Miele W 5964 WP specification

Installation and connection

Connection to the water supply

The plastic casing of the safety valve contains electrical components. The Waterproof system must only be connected to its own stopcock. It must not be connected to mixer taps or similar and must not be fitted in areas where there is the risk of water or other liquids reaching it.

Do not get wet.

The protective sleeve of the hose must not be damaged or kinked.

The machine should be connected to the mains water supply in accordance with local and national safety regulations. The German authorities do not require it to have a non-return valve as the washing machine has been designed to comply with DIN regulations.

The machine is designed to operate with a flow pressure of between 100 and 1,000 kPa (1-10 bar). If it is higher than 1,000 kPa it is essential to fit a pressure reducing valve.

Connection to the mains water supply should incorporate a mains stopcock with 3/4" thread. The stopcock should be fitted by a qualified plumber.

The connection point is subject to mains water pressure. Turn on the stopcock slowly and check for leaks. Correct the position of the washer and union if appropriate.

The washing machine is not suitable for connection to a hot water supply.

67

Image 67

Miele W 5964 WP operating instructions Connection to the water supply

Contents

Operating instructions For Washing machine W 5964 WPS Disposal of the packing material Caring for our environmentDisposal of your old machine Contents Opening the drum door in the event of a blocked drain outlet Contents Correct application Safety with children Technical safety Page Correct use Page Accessories Control panel Operating the washing machine Programme selection examples Display Optional programme packages Following are selected via Further programmes/SettingsFollowing are selected via the display Set the language Before using for the first timePreparing the washing machine Welcome screen Run your first programme Reminder to remove transit bars Calibrating the load sensor to zero Detergent When drying with a tumble dryerWashing environmentally and economically Energy and water consumption Brief instructions How to wash correctlySort the laundry Select a programme Switch on the washing machine Select an extra options Select a temperature / spin speed 25% Load the drum 100% Add detergent Start the programme Select Delay start if required Programme end unload the drum Short Extra optionsSteam smoothing Stains Further extras ShortExtra To omit the final spin Rinse hold SpinningFinal spin speed Rinse and interim spin To cancel delay start Delay startTo select delay start To change delay start Minimum iron Cold to 60C Max. load 3.5 kg Programme chartCottons Cold to 90C Max. load 8.0 kg Cottons Eco60/Eco40 Max. load 8.0 kg Freshen up Woollens Cold to 40CHygiene 30C to 90C Express Cold to 40C Drain / Spin Shirts Cold to 60C Max. load 2.0 kgDenim Cold to 60C Max. load 3.0 kg Dark garments Cold to 60C Max. load 3.0 kg Soft toys Cold to 40C Max. load 1.0 kg Trainers Cold to 40C Max pairs of shoesOuterwear Cold to 40C Max. load 2.5 kg Proofing 40C Max. load 2.5 kg Pillow 80 x 80 cm First wash Cold to 40C Max. load 3.0 kgSilks Cold to 30C Max. load 1.0 kg Pillows Cold to 90C Garment care label symbols Main wash Rinses Spinning Programme sequence Special features in the programme sequences Changing a programme Cancelling a programmeChanging the programme sequence Interrupting a programme Adding or removing laundry after a programme has started Safety lockTo activate the safety lock To deactivate the safety lock Correct detergent Detergent Detergent Water softeners Right amount to dispense will depend on the followingWashing with several components Colour run and dye removers/ dyes Fabric conditioners and liquid starchAdding fabric conditioner or starch separately External casing and fascia panel Cleaning and careCleaning the drum Hygiene info Cleaning the detergent dispenser drawer Cleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Programme does not start Problem solving guide Fault message Possible cause Remedy1 One of the following fault messages appears in the display Fault message Possible cause Remedy Load of 25% or no Problem Possible cause Remedy Display indicatesWhen the drum is Fault message General problems Fabric conditioner is not Problem Possible cause Remedy Large amountsDetergent residue remain Dispenser drawer Door will not open Blocked drain outlet Procedure for draining the machine Opening the drum door Optional spare parts and accessories After sales serviceFuture updates PC Guarantee Front view Installation and connection Rear view Transporting the washing machine to its installation site Installation surfaceRemoving the transit bars Installation and connection Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feet Washer and Dryer stack Building under a continuous worktop/in a kitchen runPlease note Drain hose Electronic unit and washing machine housingMiele Waterproof system Inlet hose Connection to the water supply Extension hose Maintenance and care Drain hose connection Connection to the drainage system Electrical connection U.K Non-rewireable plugs BS Technical data Consumption data Consumption data Language Settings menuTime Longer pre-wash Cottons Gentle action To enter the lock code To use the washing machine when the lock code is activatedLock code To activate the lock code Brightness Temperature unitBuzzer Keypad tone Anti-crease Standby display MemoryNot in current prog CareCollection Optional accessories Fabric conditioner UltraWhite detergentUltraColor detergent for coloured garments Liquid detergent For DelicatesPage Page Page Alteration rights reserved/0712/W 5964 WPS Nr 312 510