Miller Electric Metro 250D manual Weld, Power, and Engine Specifications, Volt-Ampere Curve

3.Specifications

3.1Weld, Power, and Engine Specifications

Rated Welding	Amperage	Maximum	Auxiliary Power		Fuel	Average Sound
		Open-Circuit		Engine
Output	Range		Rating		Capacity	Level
		Voltage DC
280 A, 31 V DC,		61	Single-Phase,	Deutz/Ruggerini
60% Duty Cycle	20 − 280			RD211 Air-Cooled,	11.8 US gal	74.5 dB(A) at
250 A, 30 V DC,		(Average)	10 kVA/kW, 42 A,	Two-Cylinder, 23	(44.6 L)	23 ft (7 m)
			120/240 V, 60 Hz
100% Duty Cycle				HP Diesel Engine

3.2Dimensions, Weights, and Operating Angles

	Dimensions
Height	41 in (1041 mm)
Width	30 in (762 mm)
Depth	54-1/2 in (1384 mm)

A29 in (737 mm)

B36-3/4 in (933 mm)

C9/16 in (14 mm) Dia.

Weight

960 lb (435 kg)

A

Y Do not exceed operating angles while run- ning or engine damage will occur.

Y Do not move or operate unit where it could tip.

B

25°

15° 25°

15°

C 4 Holes

angles 2/97 ST-158 938

3.3Volt-Ampere Curve

The volt-ampere curve shows the minimum and maximum voltage and amperage output capabilities of the welding generator. Curves of all other settings fall between the curves shown.

SA-180 261

OM-402 15