Miller Electric Metro 250D Installation, AC Auxiliary Power Curve, Installing Welding Generator

3.6AC Auxiliary Power Curve

The auxiliary power curve shows the auxiliary power in amperes available at the receptacles.

SA-180 260

4.Installation

4.1Installing Welding Generator

install1 1/97 − Ref. ST-800 652 / Ref. ST-800 477-A / ST-158 936-A / S-0854

1Generator Base

2Metal Vehicle Frame

3Equipment Grounding Terminal

4Grounding Cable

Use #10 AWG or larger insulated copper wire.

YIf unit does not have GFCI re- ceptacles, use GFCI- protected extension cord.

Movement		Airflow Clearance
Y Do not lift unit from end.		18 in
		(460 mm)	18 in
		18 in	(460 mm)
	OR	(460 mm)
		18 in	18 in
			(460 mm)
		(460 mm)
Location	Grounding
		1	3
			4
		GND/PE
	OR	OR
		Electrically bond genera-
		tor frame to vehicle frame
	2	by metal-to-metal contact.	2

OM-402 17