Minicom Advanced Systems 3000 manual Remote tuning

USER GUIDE

		http://192.168.111.132
	LAN	Remote tuner at the
		screen
DS Vision Service	Broadcaster
		Receivers
Utility installed here

Line Splitter

Player - IP: 192.168.111.132

Figure 26 Remote tuning

At the player the setup is done as follows:

1.Connect the Serial Download cable to the Broadcaster/Transmitter and player.

2.Open the Service Utility and choose Tools/Options, the Preferences window appears, see Figure 16 above.

3.Select the Enable Remote Control checkbox, the software starts a small web server in the background allowing other computers on the network to access it. The Check Remote Control button un-grays. Click the button to display a local browser to indicate that the remote option is enabled and functioning.

4.To verify the IP address of the player, click Start/Run, type “CMD” press Enter, type “IPConfig” press Enter. The IP address appears.

The tuning at the remote laptop/device is done as follows:

1.Open a browser and type the IP address of the player. For example in Figure 26 the remote tuner accesses the tuning facility by typing the IP address http://192.168.111.132.

2.Press Enter. A list of all Receivers Long and Line Splitters connected to the player appears, see Figure 27.

24