Minicom Advanced Systems 3000 manual Security, Service, Broadcaster’s Local Serial port

USER GUIDE

Note! Update the DDC information if you add or replace a monitor with a different resolution / refresh rate.

Get stored DDC button – Once you have saved the DDC information of a Receiver’s monitor on a computer’s hard disk, you can retrieve this information using the Get stored DDC button if for example you dismantle and then re-install the system.

Service

To restore factory defaults press Restore to factory settings. Note! All configuration and tuning adjustments will be lost.

Broadcaster’s Local Serial port

This is for Serial control of the local monitor. There are 2 options.

∙Enable - Connects the system serial data to the local monitor- downstream only.

∙Bi directional - Enables serial bi-directional connections with the local monitor – like any remote monitor in the system.

16.Security

Choose Tools/Options. In the Preferences window click Security. The Security screen appears.

Figure 31 security window

Here you can set up a password to require password access to the service Utility.

28