I n s i d e t h e S y s t e m U n i t

Replacing the configuration battery

The computer keeps a record of its current hardware configuration in a CMOS memory chip which is sustained by a small battery.

This battery has a life of up to 5 years. When the battery is discharged the contents of the configuration memory will not be maintained while the computer is turned off. If you find that you XDA-4have to reconfigure the computer every time you turn it on, the

battery is probably failing and needs to be replaced.

The battery is a 3 volt lithium type (CR2032 or equivalent) typically used in calculators and other small, battery-powered electronic items.

To replace the battery:

1.Turn off the computer and unplug all power cords.

2.Take suitable anti-static precautions and remove the system unit cover.

3.Identify the battery holder from the following illustration.

4.Lift the front edge of the battery far enough to clear the base of the holder, then slide the battery out.

A/10 APRICOT 340 OWNER’S HANDBOOK