U p g r a d i n g

5.If necessary, place the heat sink into position on top of the new processor. The vanes of the heat sink must be aligned with the airflow from the fan in front of the processor. Refit the clip that secures the heat sink to the processor.

1

2

1positioning guide

2keyed corner

6.You will need to adjust the processor speed selection jumpers on the motherboard. See Appendix A, “Inside the System Unit”, for more information about locating and adjusting motherboard jumper settings.

7.If necessary, replace the expansion cards you removed earlier.

8.Replace the system unit cover.

APRICOT 340 OWNER’S HANDBOOK 7/15