A d d i n g E x p a n s i o n C a r d s

12.If the card you have just installed is intended to control a removable-media drive, turn to the next chapter for instructions on installing the drive itself. Otherwise, replace the system unit cover.

Declaring ISA legacy resources

If you have just installed an ISA card, your first task after turning on the computer is to run the BIOS Setup utility and declare the legacy resources (that is, the interrupt, DMA channel, and so on) used by the card. This is necessary so that any PCI card fitted can be configured automatically and won’t try to use the same settings.

See the chapter on “Using the BIOS Setup Utility” for more information.

6/10 APRICOT 340 OWNER’S HANDBOOK