Mitsubishi Electronics DX-TL4516U Setting the display mode, Setting the timer program

Setting other various functions

• Setting the camera title/recorder title.

See “ Camera Title” and “ Recorder Title” on pages 67, 68.

• Setting the display mode.

See “ On Screen Information” on page 67.

•Setting the output signal of the unit status.

See “ Mode Out Settings” on page 58.

Setting the motion detection

•Selecting the camera number.

•Setting the detection areas.

•Setting the sensitivity.

•Setting the minimum number of dots for starting the motion detection operation.

•Setting the detection interval.

See “Motion Det” on page 56.

Setting the timer recording

•Setting the normal/alarm recording or pre-alarm recording.

•Setting the recording rate/picture grade for normal recording.

•Setting the recording rate/picture grade for alarm recording.

•Setting the motion detection recording.

•Selecting the camera selection during the alarm recording and trigger for alarm recording.

•Setting the alarm recording time.

•Setting the pre-alarm recording time.

•Setting the PTZ camera preset.

See “ Set Recording Pattern A (Normal/Timer) to D (Timer)” on page 49.

•Setting the timer program.

•Setting the holiday.

•Selecting the timer program number.

•Making the timer recording settings.

•Selecting the day of the week.

•Selecting the start time.

•Selecting the end time.

•Selecting the program mode.

•Selecting the motion detection mode.

(• Selecting the special day of the week.) See “Timer” on page 54.

Timer recording is executed and completed

See “ Warnings and their appropriate countermeasures” on page 108.

Searching the recorded data

• Setting the device to be searched.

See “ Select Source Device” on page 39.

• Setting the alarm list search.

See “ Search by Alarm List” on page 94.

The search is completed and the search result is displayed

Playback the search result

•Selecting the camera number to be played back.

See “ Multiplexer Setting” on page 64.

•Selecting the split/sequence screen.

See “ Multiplexer Setting” on page 64.

• Playback the recorded data.

See “ Basic playback” on page 92.

• Selecting the playback speed.

See “ Various playback functions” on page 80.

Copy the data

• Setting the copy device.

See “ Add/Remove HDD Device” or “ Add/ Remove DVD/CD Drive” on pages 75, 76.

• Setting the copy function.

See “ Copy Data to Copy 1 Drive” or “ Copy Data to Copy 2 Drive” on pages 41, 42.

Beginning

11