Menu Data | Setup Menu |
This menu is used to update and save the menu settings of this unit. This is done by loading the menu settings which is copied from another
During loading or saving the menu data, other operations are not accepted.
USB memory is usable only when the HDD is registered for main device.
Load Menu Data
This item is used to update the menu settings of this unit by loading the menu settings copied on the external media.
To load or change the menu settings stored on the external media, set the HDD settings (partition setting) of this unit to the same settings as the recorder which has been used for copying the menu settings. When these settings are different between this unit and the recorder which has been used for copying, the menu settings cannot be updated.
The menu setting cannot be updated by using the menu data of which the format is different. (For example, the construction of the menu has been changed due to the addition of the function, etc.)
Setup Menu
5 Menu Data
step 3
1
Load Menu Data
steps 1, 2
1
Load Menu Device Selection
step1. Select the device and the group to be used for loading the menu settings.
step2. Select “Eject” to eject the device.
•“Eject” appears only when the device selected on step 1 can be ejected.
step3. Select “Execute.”
•The menu settings of this unit is updated and “Menu settings data is loaded.” appears on the screen.
•When the medium to be used for loading the menu is not prepared, “Media does not exist.” appears on the screen.
When loading the data with the setting of “IP Address,” “Sub Net Mask,” “Gateway,” “Service Port Setting” of LAN or menu language selection changed, the power turns off automatically. Then this unit restarts.
The clock of the unit is not adjusted when the menu loading is completed. Adjust the time setting.
Loading the menu data is available only while the unit is in stop mode (not in playback, recording, backup, or communication).
Save Menu Data
This item is used to save the menu settings of this unit to the external device.
Setup Menu
5 Menu Data
step 3
2
Save Menu Data
steps 1, 2
1
Save Menu Device Selection
step1. Select the device and the group to be used for saving the menu settings of this unit.
step2. Select “Eject” to eject the device.
•“Eject” appears only when the device selected on step 1 can be ejected.
step3. Select “Execute.”
•The menu settings are saved to the external device.
•The menu can be saved even during playback or recording.
•When completing saving, “Menu settings data is saved.” appears on the screen.
•When the medium to be used for saving the menu is not prepared, “Media does not exist.” appears on the screen.
Loading or saving the menu data may take a few seconds to start after selecting “Execute.”
The menu items to be loaded or saved are marked with * on the check list on 
pages 110 to 125.
Operations
69
